Skip to main content ↑ ↓
Topic: Wiper replacement (Read 479 times) previous topic - next topic

Wiper replacement

I can't find a wiper to fit in that little sleeve with the little cylinder and secured by a nut and bolt.
I can make one work but I would have to pull out a reveted part on a new one.  Any ideas.
Thanks

Re: Wiper replacement

Reply #2 –
I use a AN 3/16 bolt and locknut to retain a standard style replacement.
  You may have to drill out the pin hole .

Re: Wiper replacement

Reply #3 –
It should be a  TRICO 67-261 some coaches have the  TRICO 67-241 the difference is in the length.

Mike
 

Re: Wiper replacement

Reply #4 –
Thanks