Re: Victron BMV -712 problem Reply #25 – October 07, 2021, 08:39:38 pm The battery monitor you're trying to connect to. Model BMV-712Do you have the round display inside also?If so does it have power? Quote Selected
Re: Victron BMV -712 problem Reply #26 – October 07, 2021, 09:30:33 pm Quote from: GleamB – October 07, 2021, 08:14:51 pmwhat's a BMV Go back to reply #8 it fixed this problem 10 months ago according to your reply #15 Quote Selected 1 Likes
Re: Victron BMV -712 problem Reply #27 – October 08, 2021, 09:06:37 am this is the one you said fixed it last time I believe Quote from: jbeem – December 10, 2020, 07:20:42 pmI've had this happen to me several times on my Victron solar controller. It thinks it is connected to another bluetooth device even though it isn't. You just need to do a hard reset. Try to pull the plug in back of the display and then replug it in after a few seconds. If that doesn't work pull the power wire (small red wire going to pc board on shunt) out of the shunt and then replug it in after a few seconds. Quote Selected
Re: Victron BMV -712 problem Reply #28 – October 08, 2021, 12:50:39 pm OKUpdate.Tried it, again, this afternoon. I had display on the monitor, but was having a little trouble getting the app to work on my phone. I like the phone better than the monitor. Anyway, when it asked for this crazy code, I once again, put in the 6 zeros. Success!!!It said I needed an immediate update, which I did, and then....BINGO!!! All is goodThanks to all of you for your help, especially JR who has Off The Grid LLC in Quartzite, if y'all ever need a Foretravel owner who installs solar. I know I will look him up, next time we are at the big Q, in the big tent. Quote Selected 3 Likes
Topic: Victron BMV -712 problem