Skip to main content ↑ ↓
Topic: Door Window Repair (Read 304 times) previous topic - next topic

Door Window Repair

Have a lot of water in the door window. Seen all the examples of repairing on my own. I called around to all the glass shops in my area (Toledo, OH) to just get an idea of having someone repair it if I brought it in to them. No one will touch it, only replace.
I thought I would check here if anyone that did their own and have any of this product left over and willing to sell.
I believe this is the right thickness for the door window.
Super Spacer SS1466BL Black 1/4" Wide Edgetech 66 Foot Roll
66ft is a lot but I guess it will keep if sealed back up.
I welcome any suggestions and advice.

Re: Door Window Repair

Reply #1 –
Window seals DIY
Seal is 3/16". 20/20 hindsight my plan is to have the same shop build new windows. With the water damage it is impossible to clean. And I tried. New windows also can be 99.9%UV resistant and this would be the time to add tinted glass IMO. The shop that reassembled mine cut the 1/4" down with a razor blade. Looked perfect to me. But I would order everything and have ready when I replace. Also glass is tempered so it must be cut, edges must be radiused for me then tempered
 

Re: Door Window Repair

Reply #2 –
I replaced the glass myself.  I think I heard that Peninsula Glass was no longer selling to the public but worth a check.

Rich

Entry door window & latch repair