Skip to main content ↑ ↓
Topic: Entry Door Holder-Opener (Read 456 times) previous topic - next topic

Entry Door Holder-Opener

Does anyone have a good alternative to this for holding the door open? The rubber is worn and won't "latch" anymore. I think a posilock is more money/effort than I want. I would be open to just replacing the rubber if anyone knows where to find one.
1987 Grand Villa ORED
2001 U320 4010

Not all that wander are lost... but I often am.

Re: Entry Door Holder-Opener

Reply #2 –
We've got that same door keeper rubber thingy.  Ours works OK in calm conditions, but won't stand up to a stiff breeze.  As a backup, I use a short bungee cord stretched from the door handle over to the awning hook under the adjacent window.  Simple and effective.

1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: Entry Door Holder-Opener

Reply #3 –
I was able to tighten the screw a bit to get it to hold better. might be worth trying
1991 U300 Side Aisle 6V92 Silver #3897
2004 U320 40' #6246

Re: Entry Door Holder-Opener

Reply #4 –
For what it is worth: I found a description and part numbers in my OLD 2016 RV Parts & accessories catalog.
The part is called a: Plunger Door-Stop Angled/Straight.
Angled plunger 3" #342-10304 (Bell #1762-0556) $9.14 ea.
Angled plunger 4-3/4" #342-10314 (Bell #1762-0557) $9.41 ea.
Straight plunger 3" #342-10284 (Bell #1762-0558) $9.14 ea.
I think Bell might be the name for the original manufacturer.

The replacement rubber socket repl part #342-10404 or Bell #1762-0555. Price was $3.82 back in 2016. I bought one to replace the robber on my 1989 GV from my local RV dealer.

Hope this helps
Nitehawk,  Demolition Lady, & our NEW master, Zippy the speeding BB cat.
1989 Grand Villa 36' ORED
Oshkosh chassis, 8.2 DD V8
2006 Saturn Vue AWD

Re: Entry Door Holder-Opener

Reply #5 –
Quote from: kgrover –
I was able to tighten the screw a bit to get it to hold better. might be worth trying
I believe that is part of the design of these.  Tightening collapses the bore just a little, but they can still wear out as mine did.
I switched to a different design (McMaster-Carr) but it's not really meant for outdoor use.  This original design unit is actually pretty good and I would keep with it if I were to do it again.
John Fitzgerald
1991 U300 (SAI) Side Aisle Island Bed 40'
Detroit 6V92 with Allison Retarder
Meridian (Boise), Idaho
 

Re: Entry Door Holder-Opener

Reply #6 –
Quote from: Huginn –
I think the JR Products 10635 Pivoting Door Holder Receiver is the replacement for it... Amazon.com: JR Products 10635 Pivoting Door Holder Receiver : Automotive
It is also available from Walmart.
This was exactly it, thanks. It fits so tightly that I actually ended up hitting it with a bit of dry lube because I didn't like how much it was pulling on the metal arm when I tried to close the door. It's perfect now.
As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
1987 Grand Villa ORED
2001 U320 4010

Not all that wander are lost... but I often am.