Skip to main content ↑ ↓
Topic: transmission temp. gauge (Read 346 times) previous topic - next topic

transmission temp. gauge

2002 u295 , my transmission temp dash gauge is not working. Is there any fuse protection that would be involved and if so where is the fuse located ? I have the 400 hp cumming with the allison 3000 tranny.

Re: transmission temp. gauge

Reply #1 –
Have you checked that the connection to the sender unit is clean and tight?

Re: transmission temp. gauge

Reply #2 –
I strongly recommend the Scanguage D.  Trans temp is one of the four parameters that I have displayed at all times.  I don't trust any of my dash gauges.  You may have a problem with the blue/black mystery box that all of the dash gauges feed through.

Re: transmission temp. gauge

Reply #3 –
Check at the rear bottom of the transmission. There are 2 large hoses attached to elbows, one of them has a sender with a wire that is supposed to be connected.
 

Re: transmission temp. gauge

Reply #4 –
That sender has a finnicky connection, to bad it isn't a stud with a nut.