Skip to main content ↑ ↓
Topic: How do I check coolant level in generator radiator (Read 1435 times) previous topic - next topic

How do I check coolant level in generator radiator

This morning I checked the oil level in my Kubota.  Next I wanted to check the coolant level.  Other than sticking my finger into the top of the radiator is there a more "scientific" method of checking coolant level for the generator?
George Stoltz.  Retired from full-time living in a great Foretravel and now are back to living in a traditional sticks and bricks in Florida.

Re: How do I check coolant level in generator radiator

Reply #1 –
George, do you see a coolant overflow container in the generator compartment or the driver's side front compartment?  As in the main engine cooling system, your Kubota should also be outfitted with this overflow container.  It is this container that has the proper fluid lever marking.
Peter & Beth Martin
No Forrest? What have you done?
MC# 15890 until Dec 2016; FMCA #F329677
Cincinnati, OH

Re: How do I check coolant level in generator radiator

Reply #2 –
Peter,

Compartment 1 on driver side does not contain an overflow bottle.

In the picture below it looks like the overflow bottle is behind the panel.  I will remove panel to check it out soon.
George Stoltz.  Retired from full-time living in a great Foretravel and now are back to living in a traditional sticks and bricks in Florida.

Re: How do I check coolant level in generator radiator

Reply #3 –
Quote
Compartment 1 on driver side does not contain an overflow bottle.
George , your photo is not the drivers side compartment 1.
See below.
It is hidden behind the washer fluid bottle.
The selected media item is not currently available.Barry BEAM #16014
2003 U320 40' AGDS
Beamalarm, Foretravel technical help and specifications
"Whatever the mind can conceive and believe, it can achieve"

Re: How do I check coolant level in generator radiator

Reply #4 –
George, have you tried just popping the container cap?  It appears to me that with this setup w/o a "visible" coolant level, the container should have a dip stick of some sort.  It would be impractical to have to remove the shroud everytime you need to check the coolant level which should be done once a week or at fuel stops.
Peter & Beth Martin
No Forrest? What have you done?
MC# 15890 until Dec 2016; FMCA #F329677
Cincinnati, OH

Re: How do I check coolant level in generator radiator

Reply #5 –
O.K. with my two consultants, here is where I am at.

First.  Barry:  Right.  I am aware of that.  The photo I took is of the generator compartment. My compartment 1 only contains the windshield wiper fluid bottle.  No other plastic containers are in that compartment.

Next:  Peter:  I did remove the panel because I wanted to see what is in back of it.  I found the overflow bottle with some sort of "pictograph" created by an Japanese engineer to indicate the correct level.  I was down about 1.5 inches -- so I topped it off. Also, you are correct.  That cap does pop off.  So as soon as I finish this, I am going back outside to make a small wood dipstick that I can slide into the opening to check the level -- now that I have it correctly filled.

Thanks to both of you for your help and suggestions.
George Stoltz.  Retired from full-time living in a great Foretravel and now are back to living in a traditional sticks and bricks in Florida.

Re: How do I check coolant level in generator radiator

Reply #6 –
George, there is a sight gauge area of metal missing on the side of my quiet box. If younuse a flashlight you can see the level there. Or you can pull the top.
2025 Wanderbox Outpost 32 on F600 Expedition Motorhome
2015 Born Free Royal Splendor on Ford 550 nonslide version  for sale
Former Coaches  covering. 360,000 miles
1999 34 U270
2000 36 U320
2001 42' double slide U320
2018 Jeep Rubicon