Skip to main content ↑ ↓
Topic: Checking hydraulic - Dello 400 fluid level (Read 892 times) previous topic - next topic

Checking hydraulic - Dello 400 fluid level

I have always been pulling the dip stick to check this fluid level. There is a small window in the side of the reservoir that shows that fluid is present. Can I just observe the window instead of using the dip stick? That would minimize the chance of getting dirt in the fluid.
The "add" mark on the stick is about even with the bottom of the window. See photo.
Dick, '03 U320 40' Tag, 2 slides, Coach #6075
Full Timers
2009 Honda CR-V

Re: Checking hydraulic - Dello 400 fluid level

Reply #1 –

Quote
The "add" mark on the stick is about even with the bottom of the window.
Can I just observe the window instead of using the dip stick?

You can use the window to give you an indication to check it with the dip stick.
Thus eliminating pulling the dip stick that often and keeping it a closed system.
The selected media item is not currently available.Barry BEAM #16014
2003 U320 40' AGDS
Beamalarm, Foretravel technical help and specifications
"Whatever the mind can conceive and believe, it can achieve"

Re: Checking hydraulic - Dello 400 fluid level

Reply #2 –
Thanks Barry, That is pretty much what I was thinking.
Dick, '03 U320 40' Tag, 2 slides, Coach #6075
Full Timers
2009 Honda CR-V