Skip to main content ↑ ↓
Topic: Delta Faucet out, Moen Anabelle in! (Read 1451 times) previous topic - next topic

Delta Faucet out, Moen Anabelle in!

Getting the Delta out was a serious pita because I couldn't feel the nut shown in the pic. A 17mm deep socket finally caught it - it was so loose from all my wrangling it came off easy. Basin wrench just wouldn't play in there The selected media item is not currently available.The Anabelle went in smooth - the same 'finger style' washer and a larger nut to clamp it down. I didn't realize Moen actually supplied a plastic wrench! I used an old oxyger sensor deep socket (the nut is actually a 21mm).
No leaks - the Wells A124 adapters work perfectly.
Huge improvement!The selected media item is not currently available.
The selected media item is not currently available. Dave Head & Megan Westbrook
Titusville, FL - The Great Outdoors
'98 270 buying this month
Toad is a 2018 F150 XLT

Re: Delta Faucet out, Moen Anabelle in!

Reply #1 –
Quote from: Dave Head –
Getting the Delta out was a serious pita because I couldn't feel the nut shown in the pic. A 17mm deep socket finally caught it - it was so loose from all my wrangling it came off easy. Basin wrench just wouldn't play in there
The Anabelle went in smooth - the same 'finger style' washer and a larger nut to clamp it down. I didn't realize Moen actually supplied a plastic wrench! I used an old oxyger sensor deep socket (the nut is actually a 21mm).
No leaks - the Wells A124 adapters work perfectly.
Huge improvement!
 
Dave,
Thats a great looking faucet.
The selected media item is not currently available.Barry BEAM #16014
2003 U320 40' AGDS
Beamalarm, Foretravel technical help and specifications
"Whatever the mind can conceive and believe, it can achieve"

Re: Delta Faucet out, Moen Anabelle in!

Reply #2 –
Drilled the hole for the soap dispenser today. Went with 1 1/8th" to give me more 'adjustability room'. Had to lower my undersink filter, but no drama...
The selected media item is not currently available. Dave Head & Megan Westbrook
Titusville, FL - The Great Outdoors
'98 270 buying this month
Toad is a 2018 F150 XLT

Re: Delta Faucet out, Moen Anabelle in!

Reply #3 –
Quote
Drilled the hole for the soap dispenser today.


What kind of bit did you use and how much, if any, chipping did you get in the Corian?

Re: Delta Faucet out, Moen Anabelle in!

Reply #4 –
Milwaukee bi-metal hole saw (Home Depot - 10 bucks), drill on slow speed, moving the saw in and out to keep it clear. About 7-8 minutes to drill the 3/8-1/2 thick Corian. I then sanded the hole and edges as recommended with 100 grit to eliminate micro cracks.
The selected media item is not currently available. Dave Head & Megan Westbrook
Titusville, FL - The Great Outdoors
'98 270 buying this month
Toad is a 2018 F150 XLT