Skip to main content ↑ ↓
Topic: Powertech Vibration Isolater (Read 939 times) previous topic - next topic

Powertech Vibration Isolater

Last year I remember seeing some posts regarding replacement of the rubber/urethane vibration isolaters for the Powertech generator. I don't remember if it was for the older units like mine. Someone found the isolaters from Lord Ind. at a very reasonable price. I have been searching the board and google and can't find that reference. I am ready to place an order. Can anyone help?
The selected media item is not currently available.Kent Speers
Locust Grove, OK
1993 U300 SSE 40' (Restored at FOT 2009) Build 4323
720 watts Solar
6V92TA DDEC Silver Engine
2014 Subaru Outback

Re: Powertech Vibration Isolater

Reply #1 –
Quote from: Kent Speers –
Last year I remember seeing some posts regarding replacement of the rubber/urethane vibration isolaters for the Powertech generator. I don't remember if it was for the older units like mine. Someone found the isolaters from Lord Ind. at a very reasonable price. I have been searching the board and google and can't find that reference. I am ready to place an order. Can anyone help?

Generator Isolator Mount
The selected media item is not currently available.Barry BEAM #16014
2003 U320 40' AGDS
Beamalarm, Foretravel technical help and specifications
"Whatever the mind can conceive and believe, it can achieve"

Re: Powertech Vibration Isolater

Reply #2 –
Replaced mine a year ago, powertech was great to deal with............in fact they shipped two different types, I installed one set and returned the set that I didn't use. 
Kevin

Current  1997 U295. Build #5160
Previous 1994 U300

Re: Powertech Vibration Isolater

Reply #3 –
Quote from: Kent Speers –
Last year I remember seeing some posts regarding replacement of the rubber/urethane vibration isolaters for the Powertech generator. I don't remember if it was for the older units like mine. Someone found the isolaters from Lord Ind. at a very reasonable price. I have been searching the board and google and can't find that reference. I am ready to place an order. Can anyone help?
Kent,
          Those pictures that Barry posted are from my posting. see thread below date

Good luck,



 Re: Powertech 10KW rubber mount
« Reply #4 on: September 13, 2010, 05:48:53 PM »Quote Dave,
          It is not that one as it is only 2 3/8 square. Check the square dimension. It should be 3 1/4". The correct part number is 283P-155. It is called a "Heavy Duty Plateform mount" by Lord.
Here is the web site,
Item # 283P-155, Heavy-Duty Plateform Mount Series on RPM Mechanical, Inc.
For approx $26.00 each + shipping which was reasonable as I recall, in late 2008 I bought 4 from;

Mid Atlantic Rubber
Baltimore, MD
1-800-536-1620
1-410-644-1620


Rick
1995 U-300SE 40'
CAT 3176B
Rick

Re: Powertech Vibration Isolater

Reply #4 –
Thanks to all. I actually found that I had saved the pertinent information on my own computer back when it was posted. I should have checked there first.

Does anyone know for sure that the same mounts are used on a 1993 as used on a 1994 or 1995? They sure look the same.
The selected media item is not currently available.Kent Speers
Locust Grove, OK
1993 U300 SSE 40' (Restored at FOT 2009) Build 4323
720 watts Solar
6V92TA DDEC Silver Engine
2014 Subaru Outback