Skip to main content ↑ ↓
Topic: Kool-a-matic parts (Read 1042 times) previous topic - next topic

Kool-a-matic parts

I have a Kool-a-matic motor and roof shield en salvage that needs a new home.  Will ship to a needy sole for shipping cost.  The motor was running when I pulled it out.  I replaced it with a Fantastic fan for looks, light and fewer mosquitoes. 
Laurel Hill, FL
 To do is to be---- Nietzsche
  To be is to do-----Kant
  Do be do be do----Sinatra

Re: Kool-a-matic parts

Reply #1 –
Jerry will the Fantastic fan fit the opening of the kool-o-matic without any modifications?

I have thought about replacing ours with one but haven't tried it for fit. Thanks Kerry
Kerrybob
1995 U295
1997 F250 4dr

Re: Kool-a-matic parts

Reply #2 –
Quote from: Jerry Steele –
I have a Kool-a-matic motor and roof shield en salvage that needs a new home. 

Jerry,

When last we were at Xtreme (back in May), James and Jennifer mentioned trying to find a discarded but intact shroud to try and create a mold for replacement parts (since they are no longer made).  This would turn one shroud into many (and give folks a source for replacement shrouds) if they're successful.  If it's something you'd entertain you might give them a shout.

Michelle
Learn every day, but especially from the experiences of others. It's cheaper!  - John C. Bogle

2000 U320 36' non-slide / WildEBeest Rescue
2003 U320

Re: Kool-a-matic parts

Reply #3 –
Kerry, most all roof openings are 14X14 inches which is an industry standard.  The Fanstastic fan drops right in and fits perfectly.  You will have the old screw holes to seal, which I did with the same sealant that I used on the new fan.  I even used the wire from the Kool-o-Matic switch which I left in place.
Laurel Hill, FL
 To do is to be---- Nietzsche
  To be is to do-----Kant
  Do be do be do----Sinatra

Re: Kool-a-matic parts

Reply #4 –
     Michelle, It will be sent to Nac. as soon as I can get to a shipping point.
Laurel Hill, FL
 To do is to be---- Nietzsche
  To be is to do-----Kant
  Do be do be do----Sinatra

Re: Kool-a-matic parts

Reply #5 –
Jerry

Thanks for the  information on size and fit. The "boss" wife wanted me to change out our unit because our cover is cracked and sometimes it falls down from the opening. I looked at some of the mods others have done, but she didn't like any of them.



Michelle

If the "boss" still wants me to change out our unit, I will send ours to Extreme as well.

Thank you Kerry
Kerrybob
1995 U295
1997 F250 4dr

Re: Kool-a-matic parts

Reply #6 –
Quote from: Jerry Steele –
    Michelle, It will be sent to Nac. as soon as I can get to a shipping point.
Quote from: Kerry –
If the "boss" still wants me to change out our unit, I will send ours to Extreme as well.

I know many FTers will appreciate this since it has been quite a while since anyone could find a replacement shroud.  Thanks guys!

Michelle
Learn every day, but especially from the experiences of others. It's cheaper!  - John C. Bogle

2000 U320 36' non-slide / WildEBeest Rescue
2003 U320