Skip to main content ↑ ↓
Topic: Power Line Monitor Shows 70 volts 117 where it plugs in. (Read 765 times) previous topic - next topic

Power Line Monitor Shows 70 volts 117 where it plugs in.

When I plugged in to the power post my Progressive Ind. surge protector indicated no errors but the Power Line Monitor showed 79 volts on  both legs.  30 Amp post.  The outlet it plugs into showed 117.  Is there any way to adjust the monitor voltage indicator.  The leds indicating polarity went out a long time ago.  Does anybody have a replacement for this.  It is handy to make sure the generator came on line correctly.  Thanks

Re: Power Line Monitor Shows 70 volts 117 where it plugs in.

Reply #1 –
Howdy Art,  The following topic/string may contain some answers for you:
Power Line Monitor Is On The Fritz
Good Luck, Dave Abel
Dave and Nancy Abel
'00 U320 36' WTFE  Build #5669
'10 Jeep Wrangler Unlimited Rubicon
Livingston, TX  SKP's Fulltiming

Re: Power Line Monitor Shows 70 volts 117 where it plugs in.

Reply #2 –
Kudos for the info and the link.  Karma going your way  Thanks