Re: pressure flush toilets
Reply #6 –
The issue with the Magnum Opus and altitude is that in thinner atmosphere it takes longer to build up the vacuum again after flushing and that it seemed to "leak" around the vacuum seals between flushes. The water would sloooooly seep out of the bowl and the pressure in the vacuum tank would be lost, so the pumping mechanism would have to run. I would wake in the middle of the night to the "chug-chug-a-chug" of the toilet pump. Close the bedroom door, get flashlight or turn on lights, "service mode" on the commode to keep the flap open, water, brush, check for some tiny bit of debris causing seal to fail, close flap, add water and flush. Wait. Seems OK. Turn off lights and go back to bed and try to fall asleep again. Come daylight inspect again and reapply a thin film of silicone. Really annoying! We thought we had a toilet issue, but when we moved to lower altitude, the thing miraculously "healed" itself. Now, it routinely needs very little attention. Since marine applications are very rarely found at high altitudes, I guess it is no surprise that these toilets work just fine in most applications. But they may not be happy in every location on the globe.