Skip to main content ↑ ↓
Topic: converter\charger (Read 679 times) previous topic - next topic

converter\charger

does any of you use a progressive dynamics converter?
Mike
1990 GV 36'

Re: converter\charger

Reply #1 –
Yes, a PD9270.  Not a bit of problem with them.  If you have GEL batteries, you will need to contact them about which model to order, or you can put in a jumper to adjust for the proper charge voltage.
1994 U225
build #4514

Re: converter\charger

Reply #2 –
thanks for the reply. im thinking about the getting the 80 amp one
Mike
1990 GV 36'

Re: converter\charger

Reply #3 –
Mike I have the 80 amp no problems so far.
The selected media item is not currently available.
Bobby & Norma
1992 GV U280
C8.3 Cummins

Re: converter\charger

Reply #4 –
thanks guys ill be ordering one soon
Mike
1990 GV 36'

Re: converter\charger

Reply #5 –
Think I have the 70 amp.  Worked fine for nearly a year but mine is plugged in 24/7 and there isn't much ventilation in the bay behind the steps.  I started hearing it making noise though it continued to work.  Call PD, sent it back and they sent me a new one.  So far no problems.  Make sure you get the one with the built-in charge wizard.
Dwayne Keith
1992 U240
3116/MD3060

Re: converter\charger

Reply #6 –
Quote from: Dwayne –
Make sure you get the one with the built-in charge wizard.
And make sure you get the proper charge wizard depending on your batteries.  If you get the 9200 series, it is set up for wet cell and AGM, and you have to put a IC jumper in it for GEL batteries if that is what you have.  Their tech service will guide you with the proper instructions.  Got the jumper at Radio Shack.  Hate to send anyone there, cause they don't have a clue, but that is where you can easily get the jumper.  Call their tech service and they are more than happy to help you!!!
1994 U225
build #4514

Re: converter\charger

Reply #7 –
i have a wet cell 8d
Mike
1990 GV 36'