Skip to main content ↑ ↓
Topic: Girard Awning motor (Read 738 times) previous topic - next topic

Girard Awning motor

I have a Girard 2000 awning. The motor runs but it sounds like gears are striped. The gears are most likely nylon.  Have any of you folks changed out the motor and if so, are there any tricks to the removal and installation of the new motor? Has any one found a different source to buy the motor. Girard quoted me a price of $600 plus fright for just the motor. WOW

Thank You  Karl

Re: Girard Awning motor

Reply #1 –
Karl,

I can't help on the motor (you could always call FOT, MOT, and Xtreme to see if they have a used Girard  that's been parted out), but here's the awning installation/service/repair manual if you don't have it.

The selected media item is not currently available.
Michelle
Learn every day, but especially from the experiences of others. It's cheaper!  - John C. Bogle

2000 U320 36' non-slide / WildEBeest Rescue
2003 U320

Re: Girard Awning motor

Reply #2 –
Where are you located? I live in Florida and have a girard awning that has a good motor. It is located on the right hand side of the awning. If interested let me know. Ron
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins

Re: Girard Awning motor

Reply #3 –
Hi Ron,
Yes, I would be interested. I am currently  in North Carolina.  I haven't taken the old motor out yet. It sounds like the gears are striped. Do you know if these motors are rebuildable? 
Thanks for the reply.  Karl

Re: Girard Awning motor

Reply #4 –
I don't think they are rebuildable, but have never taken one apart.
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins

Re: Girard Awning motor

Reply #5 –
HI Ron.  I took some Pictures of the model number.    It dose not look like it is rebuildable. That's nothing new. I am interested in you motor. Thank you Karl

Re: Girard Awning motor

Reply #7 –
Right now I am in Nebraska, but should be home by Sept. 7 then will have to remove it from the awning. Ron
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins

Re: Girard Awning motor

Reply #9 –
Ron, Thanks for the reply. I well keep you posted.  Karl