Skip to main content ↑ ↓
Topic: Mini Air regulator on step and one on slide replace (Read 773 times) previous topic - next topic

Mini Air regulator on step and one on slide replace

OK Today left Hill City, SD.  Got ready to leave and noticed air releasing on the right front.  crawl under and it was coming out of the air reg at top which is either for step or slide.  Duck taped and put on ties to cut down on air leak.  Called FOT//another story. Called MOT and Keith Davis told me what to do.  Stopped in Gillette, Wy at NAPA and picked another regulator part # 90-725.  Must put this on myself, all rv places would not help said booked.  Now in Buffalo, Wy.  Is there any secret to installing this regulator.  Now is the time to repair.  DAN
Dan & Shirley Stansel
2002 U295 4020 AGDS Build#6054
Towing Buick Enclave & M &  G Braking
Emerald Bay, Lake Palestine, Texas
MC# 16650

Re: Mini Air regulator on step and one on slide replace

Reply #1 –
yep, take the other one off first !! :P :P
John
Coachless, now use aircraft. 2003 Ford Travelair TC280 class C. Super shape. Just for 1 yr .
1994 Ford E350 ClassC,total renovation inside and out. Now sold.
2000 U295  36' Cummins 350 c/w Banks Stinger, Resonator upgrade,Solar, LED lites.Residential fridge with slide out pantry. Build 5674. Sold
ex 92 GV 022C ored Cummins. Sold
ex 95 GV240 cat 3116. Sold
2017 Mini cooper s & 2016 land Rover LR2 HSE  LUX.
jhaygarth@aol.com    SKP #130098
treat everyone as you would like to be.

Re: Mini Air regulator on step and one on slide replace

Reply #2 –
Dan, if you have a channel lock pliers crimp the hose going into the regulator supply side (or let all the air pressure out of the front tank.  Then replace the regulator using standard tools.  Use a bit of thread tape on the new connections and tighten into place.

Not difficult, but hard to get to if you cannot raise the coach and block it into place before getting under there.

Peter

ps.  These regulators are available anywhere (Lowes, Home Depot, etc.) in where they sell air compressors & parts.
Peter & Beth Martin
No Forrest? What have you done?
MC# 15890 until Dec 2016; FMCA #F329677
Cincinnati, OH

Re: Mini Air regulator on step and one on slide replace

Reply #3 –
If you let the pressure in the front tank drop down to 50 psi or less the check valve will prevent a blast of air in the face as you remove the old one.  You may have already noticed that the air leak stops at about 50 psi.

Monti
2015 Born Free Triumph Royal 4x4
Previous:  2000 U320 3600

Re: Mini Air regulator on step and one on slide replace

Reply #4 –
Quote from: Monti –
If you let the pressure in the front tank drop down to 50 psi or less the check valve will prevent a blast of air in the face as you remove the old one.  You may have already noticed that the air leak stops at about 50 psi.


Thanks Monti, I didn't know that!
Peter
Peter & Beth Martin
No Forrest? What have you done?
MC# 15890 until Dec 2016; FMCA #F329677
Cincinnati, OH

Re: Mini Air regulator on step and one on slide replace

Reply #5 –
Most timely & interesting subject for me too as when I had HWH check out my slide and leveling, they found some air leaks, one was on the rear leveling mainfold (they fixed that), however they also found the two regulators and one air solenoid leaking. The air solenoid is the forward most one, No idea if it is the step or the slide solenoid.  When I get home, I will play.  Had the 1/4" Tee replaced at Sioux Falls on way to Custer at Cummins shop.
Lovely
Dave M

Re: Mini Air regulator on step and one on slide replace

Reply #6 –
Dave:  Cummings in Gillette would not look at it.  But I have it installed and fixing to start engine.  Should this reg be set at about 60 lbs??  Tks DAN
Dan & Shirley Stansel
2002 U295 4020 AGDS Build#6054
Towing Buick Enclave & M &  G Braking
Emerald Bay, Lake Palestine, Texas
MC# 16650

Re: Mini Air regulator on step and one on slide replace

Reply #7 –
John H:  Must be Canadian Humor.  tks DAN
Dan & Shirley Stansel
2002 U295 4020 AGDS Build#6054
Towing Buick Enclave & M &  G Braking
Emerald Bay, Lake Palestine, Texas
MC# 16650

Re: Mini Air regulator on step and one on slide replace

Reply #8 –
OK the other one was set at 60 lbs so set this one at 60. Now I will soap for a leak and hope to be ready to go Hwy  16 to yellowstone tomorrow.  Tks For the Help.  DAN
Dan & Shirley Stansel
2002 U295 4020 AGDS Build#6054
Towing Buick Enclave & M &  G Braking
Emerald Bay, Lake Palestine, Texas
MC# 16650

Re: Mini Air regulator on step and one on slide replace

Reply #9 –
Dan, I replaced this same regulator last week.  No problem, air will leak when you loosen it or you can bleed air off at front tanks. 60 PSI is right setting.
Gary B

Re: Mini Air regulator on step and one on slide replace

Reply #10 –
My leaking at both regulators and the forward most solenoid leak slowly, anyway I ordered new OEM replacements from MOT this AM, they should arrive at home about the same time I do.
Question, the forward most solenoid is for the step or the slide ? I am clueless at this Time.
Thanks
Dave M