Skip to main content ↑ ↓
Topic: power line monitor (Read 915 times) previous topic - next topic

power line monitor

Our display on our power line monitor is not functioning properly.  There are 2 circuit boards inside of it.  The one just to the back of the display needs to be replaced.  Has anyone replaced these circuit boards or do you have to buy the whole new power line monitor? 

This is my first post.  Hope I did it right.  Had trouble finding where to post.

Thanks Art

It isnt the digital readout, but the bulbs.  I could probably repair if I had the specific instructions.  Thanks Art


1999 U320
Art Golfis

Re: power line monitor

Reply #1 –
Quote from: Art –
Our display on our power line monitor is not functioning properly

Art, can you describe the problem in more detail?  Is it the digital voltage readout or the green/yellow/red phosphor bulbs that are not working right?  There is a fix for the latter if it's just a matter of dim/flickering bulbs (if you are comfortable soldering on a circuit board or know someone who is).

Michelle
Learn every day, but especially from the experiences of others. It's cheaper!  - John C. Bogle

2000 U320 36' non-slide / WildEBeest Rescue
2003 U320

Re: power line monitor

Reply #2 –
Welcome aboard Art!  Hope you find you way back so that someone can help you out.  More details of the exact problem you are experiencing would be very helpful is solving it.
1994 U225
build #4514

Re: power line monitor

Reply #3 –
Quote from: Michelle –
Art, can you describe the problem in more detail?  Is it the digital voltage readout or the green/yellow/red phosphor bulbs that are not working right?  There is a fix for the latter if it's just a matter of dim/flickering bulbs (if you are comfortable soldering on a circuit board or know someone who is).

Michelle
Art Golfis

Re: power line monitor

Reply #4 –
Our digital readout is fine.  It is the other flashing bulbs that are out.  Any instructions.  I think we could fix it.  Thanks Art
Art Golfis

Re: power line monitor

Reply #5 –
Quote from: Art –
Our digital readout is fine.  It is the other flashing bulbs that are out.  Any instructions.  I think we could fix it.  Thanks Art

Art - here's a thread will what should be all the info on how to get working green lights again:

Power Line Monitor Is On The Fritz

Michelle
Learn every day, but especially from the experiences of others. It's cheaper!  - John C. Bogle

2000 U320 36' non-slide / WildEBeest Rescue
2003 U320