Skip to main content ↑ ↓
Topic: Wiring for the dinghy (Read 537 times) previous topic - next topic

Wiring for the dinghy

When we bought a new Honda to tow, we had a local trailer outfit do the wiring for us.  Well we have had it back 4 times because the left rear tail light is dim. Both rear lights were nice and bright when we brought it home. Anyone know what the problem might be.  Thanks Art
Art Golfis

Re: Wiring for the dinghy

Reply #1 –
Art,
First guess would be a bad ground somewhere. (somewhere being the key word) Make sure the ground wire that goes to the plug is clean and seated good to the frame. Check the trailer plug inside for cleanness and that 2 wires are not shorted out with just one strand. Hope this is a starting point.
Pamela & Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: Wiring for the dinghy

Reply #2 –
Look for corrosion in the contacts or wiring connections in the dim lamp.

Craig
1993 U225 36' Unihome GV with PACBRAKE exhaust retarder, Banks Stinger and Solar Panels.
Toad: 1999 Jeep Wrangler 2-door soft-top.

"No one has ever had to evacuate a city because the solar panels broke."