Skip to main content ↑ ↓
Topic: LED tutorial (Read 886 times) previous topic - next topic

LED tutorial

I ran across this 'LED Guide' on my trawler list and found it informative.
Finally found out what a 'Buck Power Converter' is.

http://lib.store.yahoo.net/lib/yhst-54258538930337/IdiotsGuide.pdf

HTH
Elliott & Mary Bray
ex. 1996 36' U295 - Build 4879
ex. 2018 Coachmen Leprechaun 319MB
 

Re: LED tutorial

Reply #1 –
@Elliot Very interesting paper. The 'Buck Power Converter' is new to me. Sounds like the way to go. Thanks for posting.

I can see both sides of the quality vs cheap argument. Buy the expensive "quality" bulbs and not have to worry about them or take a chance and buy the cheap Chinese bulbs in bulk off of ebay and replace when they fail.

I've already gone down the latter path and replaced my Thin-Lite florescents with cheap Chinese strip lights via the Pierce method LED Interior Lights Conversion. So far they have held up well. When I started changing out the lights I was paying close to $30 for a 5 meter roll. Last month I paid $11 a roll. White 5M 3528 SMD 600LED 120LED M Flexible Light Strip | eBay Pierce recommends the "warm white" but I've tried warm white, cool white and white and Dori and I like the "white" best so I'm in the process of trading out my "warm white" for "white". The "warm white" have a yellow hue to them that we didn't care for. The "cool white" have a blue hue. The "white" have just a slight blue hue that we like better. To each their own...

One tip. Each supplier seems to have slightly different lights so it's better to order all you think you will need at the same time from the same supplier. I ordered 8 rolls last month! I plan to add them to my bays once I figure out a way to mount them.

Edited to add picture.
I used 2 rows of strips lights per fixture and added a switch to one row to control brightness.

see ya
ken
The selected media item is not currently available.ken & dori hathaway & Big Agnes
🍺1992 U300 GrandVilla WTBI #4150 FOT FBP 2011
✨6V-92TA DDEC Parlor Coach 350HP Series 92
🏁2011 Nissan XTerra Pro-4X

Re: LED tutorial

Reply #2 –
Quote from: kenhat –

Edited to add picture.
I used 2 rows of strips lights per fixture and added a switch to one row to control brightness.

see ya
ken

I applied my LED strips to the bulb, like you set up better. Think I will do te rest "your way".

Roland
1993 U280 4341
2010 Jeep Liberty
The Pied Pipers

Re: LED tutorial

Reply #3 –
Ken,

Know what you mean about the color. I was really happy with my first couple of "warm" white rolls but then got a roll that started warm white but suddenly half way through, it went to a less pleasant warmer yellow color. Now thinking about re-doing the ceiling lights one row warm and the row next to it bright white.

I wish each roll would have the Kelvin temp listed.

Can't remember the date I first installed mine but have had no failures so far.

Pierce
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)

Re: LED tutorial

Reply #4 –
I have the same manufacurer that Pierce has and no problem with mine.
John H
Coachless, now use aircraft. 2003 Ford Travelair TC280 class C. Super shape. Just for 1 yr .
1994 Ford E350 ClassC,total renovation inside and out. Now sold.
2000 U295  36' Cummins 350 c/w Banks Stinger, Resonator upgrade,Solar, LED lites.Residential fridge with slide out pantry. Build 5674. Sold
ex 92 GV 022C ored Cummins. Sold
ex 95 GV240 cat 3116. Sold
2017 Mini cooper s & 2016 land Rover LR2 HSE  LUX.
jhaygarth@aol.com    SKP #130098
treat everyone as you would like to be.