Skip to main content
Topic: Bedroom Vanity Light Fuse (Read 391 times) previous topic - next topic

Bedroom Vanity Light Fuse

Hi All,
  Does anyone know where the fuse for the bedroom vanity lights/lamps is located? My coach is a 1997 U320.
Thanks,
Raymond
Raymond & Babette Jordan
1997 U 320
1998 Ford Explorer XLT

Re: Bedroom Vanity Light Fuse

Reply #1
I would think those are tied in with other lights in bedroom and on mine that fuse panel is on the front face of the bed frame under the drape. Small brown box with flip open cover and about 10 spade fuses in it.
John h
Coachless, now use aircraft. 2003 Ford Travelair TC280 class C. Super shape. Just for 1 yr .
1994 Ford E350 ClassC,total renovation inside and out. Now sold.
2000 U295  36' Cummins 350 c/w Banks Stinger, Resonator upgrade,Solar, LED lites.Residential fridge with slide out pantry. Build 5674. Sold
ex 92 GV 022C ored Cummins. Sold
ex 95 GV240 cat 3116. Sold
2017 Mini cooper s & 2016 land Rover LR2 HSE  LUX.
jhaygarth@aol.com    SKP #130098
treat everyone as you would like to be.

Re: Bedroom Vanity Light Fuse

Reply #2
Raymond,

At the foot of the bed should be a small black fuse box.  Use a dime or penny to open the door.  On ours the second fuse is "Vanity Lights, Engine Light".
The selected media item is not currently available.
Douglas and Amanda
1997 40' U320 "Brawley"
2007 Ford Explorer Eddie Bauer
Motorcade #17266 Escapee #113692

Re: Bedroom Vanity Light Fuse

Reply #3
Thanks John & Doug. That was the location. The fuse was fine. The bottom of the light socket has those little metal tabs for electric connection. I guess over time they had been pushed down to often. One no longer contacting the bottom of the bulb. Just a little pull, toward the top, and all was fine.
Thanks again,
Raymond
Raymond & Babette Jordan
1997 U 320
1998 Ford Explorer XLT

Re: Bedroom Vanity Light Fuse

Reply #4
If you have a fixture that is otherwise OK, but spring tension on the center electrode of the bulb is inadequate to keep good electrical contact with the bulb, there is a cheap and easy fix.

Just add a spot of solder to the bulb contact point.  Proper spring tension on the bulb reestablished.

Brett
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020

Re: Bedroom Vanity Light Fuse

Reply #5
Thanks Brett. I think that would have been easier. It is a pia to reach down into the socket, with the tweezers, and hope you move the piece just enough!
Raymond
Raymond & Babette Jordan
1997 U 320
1998 Ford Explorer XLT

Re: Bedroom Vanity Light Fuse

Reply #6
Am using a dab of RTV under the contact to offer some support, so far so good.
Used a tooth pick and good magnifier glass to sharpen my reading googles.