Skip to main content ↑ ↓
Topic: Frig Switch (Read 453 times) previous topic - next topic

Frig Switch

We've got the original Dometic RM7130 which works great. However, lately, it has stopped switching automatically from gas to electric when I run the generator or plug in. It switches fine manually. Anyone experience this? Thanks.
jor

Re: Frig Switch

Reply #1 –
jor,

 Turn off fridge and unplug then remove cover that covers the wire connections on the computer board and check them for corrosion. Make sure to check the ground wire in the back of the fridge to see if it is clean and tight where it is bolted to the fridge. Hopefully it is a bad ground and not a computer board going bad.

Pamela & Mike