Skip to main content ↑ ↓
Topic: PTS MH-10 controller replacement (Read 861 times) previous topic - next topic

PTS MH-10 controller replacement

Which controller is a good replacement for Power Tech PTS MH-10 (Kubota) .  The original unit is having problems so instead of trying to find a 17 year old model I am looking for a newer model that will be compatible with the generator.
Thanks,
Terry
Terry and Cheryl Brown
1997 U295 36'
Build #5066
2006 Jeep TJ Rubicon
1993 BMW R100 GSPD

Re: PTS MH-10 controller replacement

Reply #1 –
Terry, I replaced mine about a year ago same one just new. I'll look tomorrow and see where I got it from, it was about half the price of Power Tech, but you have to program it yourself it comes with instructions. It's likely the same one mine was built in 1998
Bruce, Linda, and Macy
Zoey RIP 1/20/19
1999 U295 40' build #5400
2017 silver Jeep Wrangler, 1260 watts of solar on top
Moving around the country

Re: PTS MH-10 controller replacement

Reply #2 –
When mine went bad on our 98 u295 I ordered one from Dave M and got it real quick and it was cheaper than going through power tec. I was very pleased with it and works great
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins

Re: PTS MH-10 controller replacement

Reply #3 –
Terry, DynaGen ES52 is what your looking for, Sounds like Dave M is the guy. However unless it comes preset you need to follow the instructions that come with it (very easy). I did not set the glow plug timer and roasted the glow plugs.
Bruce, Linda, and Macy
Zoey RIP 1/20/19
1999 U295 40' build #5400
2017 silver Jeep Wrangler, 1260 watts of solar on top
Moving around the country

Re: PTS MH-10 controller replacement

Reply #4 –
Quote from: CAPEHORN31 –
Which controller is a good replacement for Power Tech PTS MH-10 (Kubota) .  The original unit is having problems so instead of trying to find a 17 year old model I am looking for a newer model that will be compatible with the generator.
Thanks,
Terry

Is the controller the same for my pt 10k three cylinder in my 97? 

A spare would be a good idea I would think.  How do I get one?

Bob
"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4

Re: PTS MH-10 controller replacement

Reply #5 –
My 95 never had one. Always thought about adding one. Probably just replace the coach instead...
The selected media item is not currently available. Dave Head & Megan Westbrook
Titusville, FL - The Great Outdoors
'98 270 buying this month
Toad is a 2018 F150 XLT

Re: PTS MH-10 controller replacement

Reply #6 –
You can contact Dave M from here on the forum to get one and if your coach has the dyna gen system then it should work
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins

Re: PTS MH-10 controller replacement

Reply #7 –
Problem fixed!  I had a Power Tech repair technician from Destin Florida come out to my house and check out my generator start problem.  He found in 15 minutes that the oil pressure switch relay (Schrack 792h-1c-c1) was bad.  Replaced the relay and all is good again.  I am ordering a few spare relays to keep on hand.  I sure wish that I had called him months ago when this problem first started--oh well you live and learn.  Now I need to replace the generator fuel lines.
Terry and Cheryl Brown
1997 U295 36'
Build #5066
2006 Jeep TJ Rubicon
1993 BMW R100 GSPD