Skip to main content ↑ ↓
Topic: Re: HitchVise (Read 333 times) previous topic - next topic

Re: HitchVise

Quote from: Russell –
By way of follow-up (and reference to another archive item), what I'm looking to repair is the hitch receiver.  It's gotten wallowed out over time.  My solution is going to be to weld some 3/8 inch plates over existing pin holes and drill to the standard 5/8 pin size - then use longer pin.
We use HitchVise which stops all movement so there will be no wallowing.

Hitch tightener: no wobble, anti rattle stabilizer device for hitch accessories

There are other similar devices out there, but we like our Hitch Vise, which we have been using for about 8 years.

Re: Re: HitchVise

Reply #1 –
Hey Barry.  I looked at them after seeing your post in the archives.  My concern is that given the amount of wallow in in my receiver, that friction that the HitchVise provides would not be sufficient to stop the back and forth movement. 
Russell
'99 U320 CAI 40ft w/Xtreme Full Body Paint
Baton Rouge

The selected media item is not currently available."Tetons"