Skip to main content
Topic: King cruise being installed (Read 458 times) previous topic - next topic

King cruise being installed

Hello all....since my Bendix system is out of service the mechanic shop will begin installing a King Cruise replacement next week. My question is to those that have had one installed after the Bendix went out. Is there anything I should look for or insist that the mechanics do as they complete the install? Did any of you have any issues with the change over?

As always thanks for your input!
Jeff
Jeff & Carrie
2023 Geneva 31VA
1989 Grand Villa 36' ORED "The Button Pusher" - GONE 🥺

Re: King cruise being installed

Reply #1
Get with Steve Boler at King Control to find out exactly what needs to be done. Be sure to tell him that you have the Bendix cruise.

It has been years since I did it, but remember using the same wires from front to back, but changed from positive to ground or visa versa in the front.  Again, Steve is THE MAN.

Best to retain the air throttle and add the King Control Cruise.

Brett
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020

Re: King cruise being installed

Reply #2
Great thanks Brett! I'll do that Monday morning.
Jeff & Carrie
2023 Geneva 31VA
1989 Grand Villa 36' ORED "The Button Pusher" - GONE 🥺