Skip to main content
Topic: AQUA HOT ISSUE (Read 652 times) previous topic - next topic

AQUA HOT ISSUE

AQUA HOT RUNS PREFECT FOR 20 MINUTES THEN STARTS TO SLOW WHILE MAKING RATTLING NOISE OR CAVATATING. SMOKES AND SLOWS TILL STOP. FLIP SWITCH OFF THEN ON AND STARTS AND RUNS FINE??? I BENCH TESTED MOTOR AND TURBINE FOR 30 MINUTES AND RUNS FINE. SHOWS NO WEAR IN BEARINGS OR TURBINE??
HELP?

Re: AQUA HOT ISSUE

Reply #1
Jerry,

Sorry I cannot really help you.  However, if you post this question to  rvhydronicrepair.com  you will be sure to get a helpful response.  This is the Aqua Hot forum and is extremely helpful and responsive. 

Richard
Jan & Richard Witt
1999 U-320  36ft WTFE
Build Number: 5478 Motorcade: 16599
2011 Jeep Wrangler Unlimited w/Air Force One
Jan: NO5U, Richard:KA5RIW
The selected media item is not currently available.

Re: AQUA HOT ISSUE

Reply #2
Sorry that should have been  rvhydronicheaterrepair.com
Jan & Richard Witt
1999 U-320  36ft WTFE
Build Number: 5478 Motorcade: 16599
2011 Jeep Wrangler Unlimited w/Air Force One
Jan: NO5U, Richard:KA5RIW
The selected media item is not currently available.

Re: AQUA HOT ISSUE

Reply #3
Jerry,

Just got in from working on AH all day.

Roger Berke has a service program that for a flat fee of $200 including shipping, he will check out the burner and Control Unit in his shop.  The test will be under a load with the equipment needed to monitor the voltages and rpm to see what is going on.

If you contact Roger through his website, he will e-mail you a drop off label and instructions.  You would pay for any faulty parts and get a properly operating burner back.

Running the burner on a bench for 30 minutes with no fuel connected is not good for the fuel pump.
Rudy Legett
2003 U320 4010 ISM 450 hp
2001 U320 4220 ISM 450 hp
1995 U320 M11 400 hp
1990 Granvilla 300 hp 3208T
Aqua Hot Service Houston and Southeast Texas

Re: AQUA HOT ISSUE

Reply #4
I would guess that like mine the bearings are bad. I also replaced the motor. Roger is the man. He did mine and was during this winter. Ship time and repair was under a week. Works perfect now. Pretty easy to remove he will help you with all of it. A very nice person. $200 is a very very far price for labor. 5 star to me.
99 U320 40
97 Jeep wrangler toad
Now full time 8 months
Starting a new brick and wood home
Chattanooga, Tn