Skip to main content
Topic: 1995 U320 Step Well Courtesy Light Sensor Location? (Read 518 times) previous topic - next topic

1995 U320 Step Well Courtesy Light Sensor Location?

They lights in the step well are staying on.. all the time.

BTW, is this somehow effecting the door handle that isn't lighting up any longer?
Seems when I have issues, it's with both.

Thanks,  pc
S/W Houston 95" U320C SE/40' 
Build #4778  Cummins M11
Repairs & Covered RV Parking (BAO)
PPL is close..

Re: 1995 U320 Step Well Courtesy Light Sensor Location?

Reply #1
??

Only light in step well on my coach is control with baseboard "night lights" that are controlled by a switch near the entry door.

Must be special for you guys with those fancy, upper class coaches.
J D Stevens
1997 U295 CAI 36' Build #5085
2002 Subaru Outback
Motorcade 16869
Bellville, TX

Re: 1995 U320 Step Well Courtesy Light Sensor Location?

Reply #2
the handle light could just be the bulb in it burnt out. Take handle off and check it.
My switch for under cabinet lights also is same as step light by door. Check if your bathroom vanity light is on and under kitchen cabinet.
JohnH
Coachless, now use aircraft. 2003 Ford Travelair TC280 class C. Super shape. Just for 1 yr .
1994 Ford E350 ClassC,total renovation inside and out. Now sold.
2000 U295  36' Cummins 350 c/w Banks Stinger, Resonator upgrade,Solar, LED lites.Residential fridge with slide out pantry. Build 5674. Sold
ex 92 GV 022C ored Cummins. Sold
ex 95 GV240 cat 3116. Sold
2017 Mini cooper s & 2016 land Rover LR2 HSE  LUX.
jhaygarth@aol.com    SKP #130098
treat everyone as you would like to be.

Re: 1995 U320 Step Well Courtesy Light Sensor Location?

Reply #3
Hi PC,
  Our 1997 U 320 has a three switch panel on the front panel just above the steps. The center switch controls the stair step lights. This switch also controls the under cabinet lights as John mentioned.
Raymond
Raymond & Babette Jordan
1997 U 320
1998 Ford Explorer XLT

Re: 1995 U320 Step Well Courtesy Light Sensor Location?

Reply #4
I had some trouble with my handle light until I took it apart cleaned the debris out and greased it up pretty well.  One is supposed to use dielectric grease but I confess I used grease from my grease gun that is made for boat bearings and have not had a hitch with it since.  My switch for the light at the steps is on the panel (as you enter). I don't have a sensor for same.  My thought reflects mainly on the handle.  I like it to work and the outside porch light comes on perfectly too since I did the cleanin' and greasin'  LOL
Best of Travels

Re: 1995 U320 Step Well Courtesy Light Sensor Location?

Reply #5
I'll clean and put a new bulb in place for the handle.

As for the courtesy lights, this issue must be the switch
(time for DeOxit or a new switch.)

Thanks for the help, pc
S/W Houston 95" U320C SE/40' 
Build #4778  Cummins M11
Repairs & Covered RV Parking (BAO)
PPL is close..

Re: 1995 U320 Step Well Courtesy Light Sensor Location?

Reply #6
Was not the middle door switch after all. 

Small box..  door handle sensor had found its way to the floor which was (also) responsible for keeping the step well courtesy lights for going out.

Put things back in place and all's well till my next test..

Thanks for the help, pc
S/W Houston 95" U320C SE/40' 
Build #4778  Cummins M11
Repairs & Covered RV Parking (BAO)
PPL is close..