Skip to main content ↑ ↓
Topic: ABS reset switch (Read 572 times) previous topic - next topic

ABS reset switch

My ABS light is on. I have reset all the plugs going into the Wabco box and driven the coach afterward, no change. I can hear 8 clicks when I turn the ignition on. I see other posts on this subject talking about the two switches under the dash. It is my understanding that one activates a blink code and the other is a reset for the main control box, is that correct? I have not located them yet any help on their location would be appreciated. 
2002 U320 40Ft  MC # 15759
Coach # 5995
Previous coaches
2002 U320 coach  #5941
1996 U270 coach #4808

Re: ABS reset switch

Reply #1 –
Hi Falconguy,
  On our 1997 U 320 the switches are under the half round dash cover. The cover over all our gauges. Just give the cover a firm pull up and it opens. The pair of rocker type switches are wired in the rear, near the top.
I hope this helps.
Raymond
Raymond & Babette Jordan
1997 U 320
1998 Ford Explorer XLT

Re: ABS reset switch

Reply #2 –
OK thanks Ill take a look tomorrow.
2002 U320 40Ft  MC # 15759
Coach # 5995
Previous coaches
2002 U320 coach  #5941
1996 U270 coach #4808

Re: ABS reset switch

Reply #3 –
Quote from: Falconguy –
My ABS light is on. I have reset all the plugs going into the Wabco box and driven the coach afterward, no change. I can hear 8 clicks when I turn the ignition on. I see other posts on this subject talking about the two switches under the dash. It is my understanding that one activates a blink code and the other is a reset for the main control box, is that correct? I have not located them yet any help on their location would be appreciated. 
On ours it is tucked under the dash towards the front drivers side. You need to get down and look in.
ABS Troubleshooting
The selected media item is not currently available.Barry BEAM #16014
2003 U320 40' AGDS
Beamalarm, Foretravel technical help and specifications
"Whatever the mind can conceive and believe, it can achieve"

Re: ABS reset switch

Reply #4 –
On my 96' U 320, the owners manual says the ABS light n indicates the system is operating--- seems incorrect, but that is what it says
Current coach 1996 U320 40'
Previous coach, 1990 36' U280

Re: ABS reset switch

Reply #5 –
Another opportunity to plug the VMSpc unit.  It tells me why the ABS light is on.  My left rear ABS sensor seems to like to act up every now and then, thus sending the light on every now and then.  VMSpc tells me where the issue is when it does.
The selected media item is not currently available.Brad & Christine Slaughter
Was:  1990 U280 36'
Was:  2002 U270 36' (With a bathroom door) Build #5981
Is:  2021 Leisure Travel Van Wonder 24RL
2015 Jeep JKU, 2003 S10 QC 4x4 or 2017 C-Max
Lake Havasu City, AZ (or Gillette, WY)