Skip to main content ↑ ↓
Topic: Drivers Seat Refurbishing (Read 568 times) previous topic - next topic

Drivers Seat Refurbishing

We took ''Nelson'' out for a drive today!  Betsey and 2 of our dogs went ,it was all their first ride. The Coach ran great. We both feel we hit the lottery on this thing and are going to have many many good times,I noticed that the divers seat has a sag in it. is there anyone that has refoamed the seats in these for more support?
91 GV U300 Unihome 40' Build 3811
6V92TA Detroit

Re: Drivers Seat Refurbishing

Reply #1 –
I have done 4 lately, as long as the cover is good, removed seat, turned upside down, cut strips of new foam, worked into the old padding, I was happy. This was on a 1990 and a 1992 Foretravel.
George Ray 1992 U280 40'

Re: Drivers Seat Refurbishing

Reply #2 –
Flexsteel has exact replacement 'manufactured' foam pieces if Flexsteel chair number is known. Vinyl / leather cover comes off and can be put back on. replacing_seat_foam_in_motorhome_chair

Re: Drivers Seat Refurbishing

Reply #3 –
Thank You I will get the number off the seat and give them a call.
91 GV U300 Unihome 40' Build 3811
6V92TA Detroit

Re: Drivers Seat Refurbishing

Reply #4 –
We found the seat model number on a small piece of paper shoved between the seat spring and the foam. The foam they made was computer cut with different foams and shapes glued together, very first class. We also added some more foam to the seat to better suit our needs.