Skip to main content ↑ ↓
Topic: 130 volts, Gage not returning to normal. (Read 464 times) previous topic - next topic

130 volts, Gage not returning to normal.

So I started the generator and noticed 130+ output on the PowerTech meter...shut of the Gen and the gauge stays at 130+,plugged in shore power and still 130??.Shut all systems down and PowerTech meter is still at 130.???
Is this gauge bad  ??? and where can a new unit be bought.

Thx

Hans
Hans & Marjet
1995 U300 "Ben" (#4719)
3176B Cat,4060HD,Jake
SKP#139131
Motorcade#17579
2006 Honda Element (towed)

Re: 130 volts, Gage not returning to normal.

Reply #1 –
Hans,

Those gauges are often in error.  Check with a good digital voltmeter in the wall socket near the gauge.  The gauges can be "calibrated" (i.e. adjusted).
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020

Re: 130 volts, Gage not returning to normal.

Reply #2 –
Mine reads low as well. I installed a Progressive Industries EMS-HW50C. It is installed after the transfer switch so it shows me load/voltages and protects everything when using shore power or generator.

I've had generator voltage regulators fail in the past.
1998 U270 34'

Re: 130 volts, Gage not returning to normal.

Reply #3 –
Quote from: sfbmw –
So I started the generator and noticed 130+ output on the PowerTech meter...shut of the Gen and the gauge stays at 130+,plugged in shore power and still 130??.Shut all systems down and PowerTech meter is still at 130. ???
Is this gauge bad  ??? and where can a new unit be bought?.........................
Hans,
Either the Powerwatch has failed, or more likely, the meter saw a spike and pegged high.  Did you try a little "percussive calibration" (tap the meter face sharply, over the meter pointer pivot point, with one finger).
I don't think that the Powerwatch units are still available for purchase, new, but they are not that complex and there are several threads on the forum regarding various repairs and calibration of same.
Good Luck,
Neal
The selected media item is not currently available.
Neal (& Brenda) Pillsbury
'02 U320 SPEC, 4200, DGFE, Build #5984
'04 Gold Wing
'07 Featherlite 24'
'14 Jeep Grand Cherokee Summit
MC #14494
Exeter, NH & LaBelle FL
Quality makes the Heart Soar long after Price is Forgotten