Skip to main content
Topic: How Do I Remove Light Switch Cover? (Read 736 times) previous topic - next topic

How Do I Remove Light Switch Cover?

I apparently have a problem with the switch for the Makeup light in the bathroom. The button itself is slanted and loose. I have tried to remove the panel surrounding it and the other three switches, but have had no luck. I can raise the panel slightly, but cannot see any lever or release I could push to remove the panel and access the switches. Has anyone been able to do this without cracking the panel?

Thanks for any pointers.

Don
2007 Nimbus 340 quad slide
Build #6386 FMC #17360 FMCA #441779

Re: How Do I Remove Light Switch Cover?

Reply #1
Don, are there pressure clips on the back side? The kind that expand behind the wall.. Just a thought.
The selected media item is not currently available.
My advice and experiences are Free, you decide if they are worth anything .

John - driving Old Faithful
1994 U280 GV
C8.3, Banks, Pacbrake, 900 watts, Resonator, XLHD tow dolly
Retired Army Warrant Officer

Life is what you make of it - if it is lemons, make lemonade!
Former Coaches:
1988 GV 40' ORED 300HP CAT - 9 years
1990 Winnebago LeSharo - 3 years
2000 Newmar London Aire - 3 years (#18 of 23 produced)

Re: How Do I Remove Light Switch Cover?

Reply #2
John, good thought, but I can't see any. Am afraid to pry to cover away any further. Expect that would crack it. Should be able to release it without this much pressure, just can't find the right place to press or pry.

Don
2007 Nimbus 340 quad slide
Build #6386 FMC #17360 FMCA #441779

Re: How Do I Remove Light Switch Cover?

Reply #3
Can you post a picture of the panel you are trying to remove ?
2000 / 36' / U320 / WTFE
WildEBeest / "Striving to put right what once went wrong"

Re: How Do I Remove Light Switch Cover?

Reply #4
Sorry about the picture. Should have thought of that. See below.

Thanks,

Don
2007 Nimbus 340 quad slide
Build #6386 FMC #17360 FMCA #441779

Re: How Do I Remove Light Switch Cover?

Reply #5
Don,
I can not tell you how to take it off without the risk of breaking it but I bet if you call either MOT or FT, wherever you bought it, they will tell you.  The service department or parts can probably tell you by looking at a new one.
2025 Wanderbox Outpost 32 on F600 Expedition Motorhome
2015 Born Free Royal Splendor on Ford 550 nonslide version  for sale
Former Coaches  covering. 360,000 miles
1999 34 U270
2000 36 U320
2001 42' double slide U320
2018 Jeep Rubicon

Re: How Do I Remove Light Switch Cover?

Reply #6
If I recall, those have plastic latches on the sides that hold them in place.  You have to slide something (like a plastic scraper) in from the L/R sides and depress the latch while pulling forward on it.  May have to do one side and then the other but sometimes you can just release one side and get it out.
2000 / 36' / U320 / WTFE
WildEBeest / "Striving to put right what once went wrong"

Re: How Do I Remove Light Switch Cover?

Reply #7
Steve, I'll do some more poking around and see if I find anything on the sides. That's kind of what I thought might work, too, but didn't see anything right away.

If that doesn't work, I'll follow John's suggestion on Monday and give Mike Rodgers a call at MOT.

Thanks guys,

Don
2007 Nimbus 340 quad slide
Build #6386 FMC #17360 FMCA #441779

Re: How Do I Remove Light Switch Cover?

Reply #8
Nice thin tool to get behind the cover plate would be a spatula. Plastic so no chance of sparking.
Nitehawk,  Demolition Lady, & our NEW master, Zippy the speeding BB cat.
1989 Grand Villa 36' ORED
Oshkosh chassis, 8.2 DD V8
2006 Saturn Vue AWD