Foretravel Owners' Forum For owners and Fans of Foretravel Motorcoaches September 17, 2025 ...

HWH Solenoid 3rd "O" Ring Part number

June 07, 2015, 07:49:03 pm

I am looking for a part number or size of the HWH Solenoid 3rd internal  "O" Ring. I see HWH sells the 2 outer "O" rings and I have found them at Ace Hardware but do not see the 3rd listed anywhere. Has anyone found these somewhere? I need to replace a couple.

Quote Selected

Re: HWH Solenoid 3rd "O" Ring Part number

Reply #1 – June 07, 2015, 10:35:40 pm

Barry,
If all else fails try:
Sealcompany.com
Have used them in Tulsa years ago.They always came up with what we needed.
If you can talk to someone there you probably can send one and they will likely match it.
JD

Quote Selected

Re: HWH Solenoid 3rd "O" Ring Part number

Reply #2 – June 08, 2015, 09:55:16 am

As you know HWH does not always list the "internal parts", like the valve seat, although I'm sure they would give out that O-Ring P/N.  Anyway I took one of my old valves ones apart to measure  the o-ring

My measurements were CS:  0.065,  ID: 0.805 give or take

Based on that appears to be a AS568-019 which is  CS: .070±.003, ID  .801±.009

Quote Selected

Re: HWH Solenoid 3rd "O" Ring Part number

Reply #3 – June 08, 2015, 10:00:46 am

I have purchased o-rings for my HWH Solenoids at:
Wesley Seals & Supply INC.
236 Bedford-Euless Rd. Unit #4
Hurst, TX 76053-4043
PH. 817-284-3283
FAX 817-284-2037

015 Oring 70 buna------------$0.17 each
020 Oring 70 buna------------$0.20 each
027 Oring 70 buna------------$0.25 each

I took the orings, off my solenoids, to this company and this is what they matched them with. In another post I believe Barry stated a size of #15-#19-& #28. So there may be a small size discrepancy. The #27 I was given could be a hair bigger but they all seem to work fine. As cheep as they are I purchased enough to always have a supply on hand.

Quote Selected