aquahot not working on all zones
Well, i am at the rally and had to use my heat for the first time since last winter. I went to turn it on and I got only the bedroom AH zone to put out heat on electric only. SO I turned on the diesel and saw it did not fire up either. I thought about it for a bit then realized if the front and middle are both not working then it had to be a relay in the AH unit. I opened it up and yup the second one down had fallen out and the first one was loose. I pushed in the two that were in and put in the middle one and I called up and had the AH turned on both at the switch and thermostat as I was still under the coach and dry in the rain. I was rewarded hearing the burner fire and when I went inside, I hear and felt the hot hair coming out of the zones it was not coming out of.. It is tough to reach that unit in the middle of the coach but it was easier to get in then the last time after surgery that I had to crawl under there and ended up taking it to Keystone to have them put on the J bolt on the back of the burner. These roads are pretty rough lately.