Skip to main content ↑ ↓
Topic: Convex mirror (Read 597 times) previous topic - next topic

Convex mirror

During a trip to Palm Dessert last October, my driver side convex mirror fell off somewhere on I-5. I taped a temp mirror on for the rest of the trip. I received the replacement from Remco and when I remove the winter cover off the GV one of my first jobs will be installing the new mirror.
 My question is, how do I remove the old mirror plate from the housing, only the glass fell off and there is a black mirror housing somehow attached.
Thanks for any advise.
GeoffH
Geoff & Pat Haygarth
1994 U240 SBI GV 36ft Cat 3116, Allison 6 speed
 Build #4448
2015 Jeep Wrangler Sport

Re: Convex mirror

Reply #1 –
Geoff,

On our '97 that plate is attached to the movement motor with industrial strength Velcro.  We had to pull & tug till it let go. It may be different on your '94 though.

Pamela & Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: Convex mirror

Reply #2 –
thanks for the quick reply.
Pre 2000 are supposed to be glue-on, but you have a 1997 and it is Velcro, go figure! I think mine is glued on but to get something in behind the cup-like shroud seems quite difficult, Ramco instructions say to use a warm putty knife but I don't see how the knife can get in there?
 I was thinking of using my heat gun gently on the front plate?
Geoff & Pat Haygarth
1994 U240 SBI GV 36ft Cat 3116, Allison 6 speed
 Build #4448
2015 Jeep Wrangler Sport

Re: Convex mirror

Reply #3 –
Mine fell of while stopped.. took off velcro and cleaned.. siliconed.. blue tape

Cleaned the mirror.. that was 2 years ago
The selected media item is not currently available.
My advice and experiences are Free, you decide if they are worth anything .

John - driving Old Faithful
1994 U280 GV
C8.3, Banks, Pacbrake, 900 watts, Resonator, XLHD tow dolly
Retired Army Warrant Officer

Life is what you make of it - if it is lemons, make lemonade!
Former Coaches:
1988 GV 40' ORED 300HP CAT - 9 years
1990 Winnebago LeSharo - 3 years
2000 Newmar London Aire - 3 years (#18 of 23 produced)

Re: Convex mirror

Reply #4 –
Geoff,

I lost the mirror on my driver's side top hat. Well, not actually lost; it started vibrating and I stopped. When I touched it, it came off in my hand.

I am very interested in this thread, because it looks like it had been attached with some kind of caulk/adhesive. Just need to find out what to use to glue it back.

Guess I should contact Ramco because I broke one of my adjustment switches, so will replace both of them.

Keep those responses coming,

Trent
Trent and Jean Eyler
2000  U295  4003  WTFE  ISC  350
Build#5603 MC#17385

Re: Convex mirror

Reply #5 –
On our 1997 U295, the mirror is attached to a metal plate with velcro. The metal plate is attached to the ring on the motors with adhesive caulk.

In high winds in Nebraska, the adhesive caulk let go and we lost the mirror and mounting place. I put in the new motors, then attached the new metal place with the adhesive caulk. The next day, I attached the mirror with the velcro.

I got all parts from FOT. They used our build number to get the proper parts.
J D Stevens
1997 U295 CAI 36' Build #5085
2002 Subaru Outback
Motorcade 16869
Bellville, TX

Re: Convex mirror

Reply #6 –
 I think what I will do is try and pry the skirt up and out from the backing mechanism ( Velcro connection ) and if this does not release it then I will try to get a warm putty knife behind the mirror skirt.
Has anyone performed either method? and - what # silicone is used?
Thank s to all
Geoffh
Geoff & Pat Haygarth
1994 U240 SBI GV 36ft Cat 3116, Allison 6 speed
 Build #4448
2015 Jeep Wrangler Sport

Re: Convex mirror

Reply #7 –
Mine came loose and I re glued it with clear silicone and used a piece of duct tape to hold it in place until everything dried,worked great.
91 GV U300 Unihome 40' Build 3811
6V92TA Detroit

Re: Convex mirror

Reply #8 –
We have to recognize that we are dealing with very aged plastic parts.  When I attempted to work on my lower mirror I succeeded in breaking more parts as I attempted to separate Velcro and cut caulking.  In the end I ordered an entirely new motor assembly.
Regards,
Brett

'99 42' Foretravel Xtreme
'14 Brown Motorsports Stacker
'05 Chevy SSR
'02 BMW R1150R

Re: Convex mirror

Reply #9 –
Are all of the mirrors attached with velcro? My passenger side mirror has been whacked by so many bushes in campgrounds that the heater in the flat mirror has stopped working. The heater in the convex mirror still works though. I tried to figure out how to get the flat mirror off so I could see if maybe the heater just came unplugged or something. It seems to be attached a lot more securely than velcro. I didn't want to break the mirror and the heater isn't very important so I decided to wait until I'm in Nacogdoches and have Foretravel take it off to investigate.
Scott Cook
1991 U300 36' 6V92TA
Old Town Penobscot 16
1984 Honda VF1100C (V65 Magna)

Re: Convex mirror

Reply #10 –
Quote from: RRadio –
Are all of the mirrors attached with velcro? My passenger side mirror has been whacked by so many bushes in campgrounds that the heater in the flat mirror has stopped working. The heater in the convex mirror still works though. I tried to figure out how to get the flat mirror off so I could see if maybe the heater just came unplugged or something. It seems to be attached a lot more securely than velcro. I didn't want to break the mirror and the heater isn't very important so I decided to wait until I'm in Nacogdoches and have Foretravel take it off to investigate.
Scott mine had been glued in originally on my 91
91 GV U300 Unihome 40' Build 3811
6V92TA Detroit

Re: Convex mirror

Reply #11 –
Geoff, check measurements of the new mirror against the opening of frame as when I had Remco send me a new one a few years back they sent one for a C Coach (wrong shape) then sent the right one, and I cannot remember how it is affixed ???? Dumb Brother hey?
JohnH
Coachless, now use aircraft. 2003 Ford Travelair TC280 class C. Super shape. Just for 1 yr .
1994 Ford E350 ClassC,total renovation inside and out. Now sold.
2000 U295  36' Cummins 350 c/w Banks Stinger, Resonator upgrade,Solar, LED lites.Residential fridge with slide out pantry. Build 5674. Sold
ex 92 GV 022C ored Cummins. Sold
ex 95 GV240 cat 3116. Sold
2017 Mini cooper s & 2016 land Rover LR2 HSE  LUX.
jhaygarth@aol.com    SKP #130098
treat everyone as you would like to be.

Re: Convex mirror

Reply #12 –
Good quality product, had them in black on the Airstreams. I like the chrome ones with the remote adjust and signals. I think my lower mirrors are bedded in velcro. My files show these are fairly new.
1993 U-240 "La Villa Grande"..CAT 3116 w/ Pacbrake PRXB...Allison 3060 6-speed..
Previous: 1983 Airstream 310 turbo diesel, 1979 Airstream 280 turbo diesel
                                      Build # 4297
                                      PNW natives
                      Home base:  'Cactus Hug' (Ajo, Arizona)
                        DW Judy & Chet the wonder dog
                        Full-Timers 'Sailing the asphalt sea'