Skip to main content
Topic: Replacement valve stems for my 1995 U300 40' with a CAT (Read 402 times) previous topic - next topic

Replacement valve stems for my 1995 U300 40' with a CAT

I just ordered 6 Yokohama part number 02391 295/75r22.5 16 ply tires, and also purchased a pair of 120psi Crossfire's for the rear.
What I am after is the proper part number stems for both the front, and for the rears- including extensions for the inner (compatible with the crossover hardware).
NAPA has some online that "look" like they might work, but....
Anyone have experience with the Crossfire adaptation on a factory original set-up?

I'm FINALLY getting close to getting the Coach on the road. Tires and valve stems are the originals. Yes - 21 year-old Michelins with  total of 7K miles on them.
Michael
1995 U300SE CAT 3176B Build # 4612 ("Marvin")

Re: Replacement valve stems for my 1995 U300 40' with a CAT

Reply #1
Michael,

I would contact your wheel manufacturer.  Should be PN as well as manufacturer information readable on the rear outer.
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020

Re: Replacement valve stems for my 1995 U300 40' with a CAT

Reply #2
Brett,
They are the factory fitted Alcoa wheels.
But I will get the part numbers off the rims.
Thanks.
Michael
1995 U300SE CAT 3176B Build # 4612 ("Marvin")

Re: Replacement valve stems for my 1995 U300 40' with a CAT

Reply #3
I would also talk to Crossfire and see what setup they recommend. Are you purchasing the Crossfires from a 3rd party or from the tire store. If from the tire store they should be able to guide you to the proper stems. I would go with metal stems and premium o-rings regardless.

see ya
ken
The selected media item is not currently available.ken & dori hathaway & Big Agnes
🍺1992 U300 GrandVilla WTBI #4150 FOT FBP 2011
✨6V-92TA DDEC Parlor Coach 350HP Series 92
🏁2011 Nissan XTerra Pro-4X

Re: Replacement valve stems for my 1995 U300 40' with a CAT

Reply #4
Thanks for the tips. I decided to just use a mobile heavy-truck service called Pinky's out of Ventura, CA. They are coming to the Coach and installing a full-set of tires and new stems that are compatible with the Crossfire on the duals.

Their price on the Yokohama's was competitive, and the guy says they install a lot of them as a Yokohama Dealer and can get me fresh date codes. The previous source that ordered them in -- showed date codes over a year old.

It's going to cost me about an additional $300 for the mobile service -- BUT -- to me the peace of mind is worth it. I was not looking forward to driving even the 3 miles on the 21 year old Michelin's to the other tire store.

Happy & Safe Motoring!
Michael
1995 U300SE CAT 3176B Build # 4612 ("Marvin")