Skip to main content ↑ ↓
Topic: Problems with PS 250 transfer switch  (Read 1575 times) previous topic - next topic

Problems with PS 250 transfer switch

So I ha e been working on the bus in the shop and had 110 going in , finished back out and ran the generator for a little while, next day hooked up to 110 and transfer switch would  not click over, opened the T W box and the shore power switch would not push in allowing to make contact. Would the contacts under the bed prevent this?
Andy & Eileen
MONTROSE COLORADO
1992 U300  40' 6V92 TA
2016 4 Runner
1998 Jeep Grand cherokee

1998 Jeep Grand Cherokee) Build # 4135 Skp# 122921

Re: Problems with PS 250 transfer switch

Reply #1 –
Looks like you have a stuck contacter , if one is stuck you can not move the other one.
The selected media item is not currently available.Bill&Doris 97 U270 36'
University of Parris Island Class of 66
Semper Fi  Build# 5174 MC#17094

Re: Problems with PS 250 transfer switch

Reply #2 –
Thanks Bill, the lower one is stuck for shore power the upper one works with the generator and it can be pushed in? Is there anyway to unstick it?
Andy & Eileen
MONTROSE COLORADO
1992 U300  40' 6V92 TA
2016 4 Runner
1998 Jeep Grand cherokee

1998 Jeep Grand Cherokee) Build # 4135 Skp# 122921

Re: Problems with PS 250 transfer switch

Reply #3 –
See if the contacter has a number on it and replace it,  once they are burnt together they will do it again if you can get it unstuck.
The selected media item is not currently available.Bill&Doris 97 U270 36'
University of Parris Island Class of 66
Semper Fi  Build# 5174 MC#17094

Re: Problems with PS 250 transfer switch

Reply #4 –
Thanks Bill,i think I will just replace the whole switch, getting that one out it is riveted to the box.
Andy & Eileen
MONTROSE COLORADO
1992 U300  40' 6V92 TA
2016 4 Runner
1998 Jeep Grand cherokee

1998 Jeep Grand Cherokee) Build # 4135 Skp# 122921