Skip to main content ↑ ↓
Topic: missing parts (Read 708 times) previous topic - next topic

missing parts

I am missing knobs and swivel neck does anyone have an idea where to get parts don't see a manufacture name. 
Art
1997 Prevost 40'
 The selected media item is not currently available.

Re: missing parts

Reply #1 –
You should be able to go to a H Depot or? plumbing dept and pick those up. I know we can go to ours for that sort of thing as they are very standard pieces.
JohnH
Coachless, now use aircraft. 2003 Ford Travelair TC280 class C. Super shape. Just for 1 yr .
1994 Ford E350 ClassC,total renovation inside and out. Now sold.
2000 U295  36' Cummins 350 c/w Banks Stinger, Resonator upgrade,Solar, LED lites.Residential fridge with slide out pantry. Build 5674. Sold
ex 92 GV 022C ored Cummins. Sold
ex 95 GV240 cat 3116. Sold
2017 Mini cooper s & 2016 land Rover LR2 HSE  LUX.
jhaygarth@aol.com    SKP #130098
treat everyone as you would like to be.

Re: missing parts

Reply #3 –
What you have is the old style Moen, probably the same 8100 that I have.  As others have said, you're probably better off buying a new faucet than trying to buy the missing parts.  The new Moen 8126 will not mount to your existing wall connections.  You would either need to change the connections or buy the regency that is listed above.  It is supposed to fit your existing wall connections.  I can't speak to the quality vs Moen or anything else as I haven't actually seen or used it.

Re: missing parts

Reply #4 –
And if you need new cartridges for that older faucet they are somewhat hard to find and north of $40.  A replacement might be a good choice. Moen faucets, if one fits, now have a lifetime replacement on cartridges. 
Roger Engdahl and Susan Green
2001 U320 3610 #5879 (Home2) - 2014 Jeep Cherokee or 2018 F150
Hastings, MN

Re: missing parts

Reply #6 –
They make a faucet set that will fit most spacings.  The inlet pipes swivel to adjust.  Ask at your local plumbing supply house.
Like this:
http://www.prodrinkingfountains.com/ProductDetails.asp?ProductCode=LK945TS08T4T&gclid=CjwKEAiAg5_CBRDo4o6e4o3NtG0SJAB-IatY3DnG4gA1wMAVDOnUUPsii5yiYWpYB96KTJWN-aPfJxoCOpTw_wcB

Keith
Keith, Joyce & Smokey the Australian Cattle Dog
1995 U320 SE Extreme 40' WTBI Build # 4780, with a Honda CR-V hopefully still following behind.
Motorcade # 17030
FMCA # F422159

Re: missing parts

Reply #7 –
Thanks' for info I think I will get a Moen Regency
Art
1997 Prevost 40'
 The selected media item is not currently available.

Re: missing parts

Reply #8 –
Quote from: prevostart –
Thanks' for info I think I will get a Moen Regency
To be clear, the Regency is not made by Moen.  It looks very similar though & it should work with the existing Moen wall fittings, unlike the new Moen model.  The cost is a fraction of a Moen.  Almost too low.

If your old Moen body is not damaged, it probably still has some value on the Forum.  Lot's of them have been cracked by water freezing in the valve body.  Yours would be an easy change out for someone that needs it.