Skip to main content ↑ ↓
Topic: Adhesive for towel rod (Read 942 times) previous topic - next topic

Adhesive for towel rod

Can anyone tell me what would be my best choice for adhesive to re-apply the towel rod to the glass on the Alumax shower door.

TIA
Ed
Ed and Michele
2000 U295  36'  (Build #5600)
8.3 ISC 350HP.
2012 Jeep Grand Cherokee (Toad)
2001 Lance Truck Camper (Sold)
2001 Lazy Daze (Class C). RK Floor Plan (Sold)

Re: Adhesive for towel rod

Reply #1 –
Probably not epoxy. Check with a local glass installer. Probably a very specific prep process
Roger Engdahl and Susan Green
2001 U320 3610 #5879 (Home2) - 2014 Jeep Cherokee or 2018 F150
Hastings, MN

Re: Adhesive for towel rod

Reply #2 –
Clean the old adhesive off, wipe with rubbing alcohol and apply some latex caulk.  You will have to secure the bar in place until the caulk dries.

Re: Adhesive for towel rod

Reply #3 –
Go to an auto parts store and get the adhesive used to hold rear view mirrors on to the windshield.
1994 U280, Build 4490
Deming, NM.

Re: Adhesive for towel rod

Reply #4 –
Quote from: Twig –
Go to an auto parts store and get the adhesive used to hold rear view mirrors on to the windshield.
I probably screwed up the application but that didn't work for me Twig, thanks.
Ed and Michele
2000 U295  36'  (Build #5600)
8.3 ISC 350HP.
2012 Jeep Grand Cherokee (Toad)
2001 Lance Truck Camper (Sold)
2001 Lazy Daze (Class C). RK Floor Plan (Sold)

Re: Adhesive for towel rod

Reply #5 –
My vote is..................SHOE GOO!! Apply to one part, place in position and held in position by duct tape until the Shoe Goo cures--likely a couple days if cool temps .
Nitehawk,  Demolition Lady, & our NEW master, Zippy the speeding BB cat.
1989 Grand Villa 36' ORED
Oshkosh chassis, 8.2 DD V8
2006 Saturn Vue AWD

Re: Adhesive for towel rod

Reply #6 –
Bummer.
1994 U280, Build 4490
Deming, NM.

Re: Adhesive for towel rod

Reply #7 –
Quote from: nitehawk –
-likely a couple days if cool temps .

Nitehawk, your quote along with your profile photo made me chuckle.
Ed and Michele
2000 U295  36'  (Build #5600)
8.3 ISC 350HP.
2012 Jeep Grand Cherokee (Toad)
2001 Lance Truck Camper (Sold)
2001 Lazy Daze (Class C). RK Floor Plan (Sold)

Re: Adhesive for towel rod

Reply #8 –
Well, I do like to think I am not your average idiot. I am a slightly above average idiot!! >:D  ^.^d

And, I am NOT overweight!! My height is what is wrong!!
Nitehawk,  Demolition Lady, & our NEW master, Zippy the speeding BB cat.
1989 Grand Villa 36' ORED
Oshkosh chassis, 8.2 DD V8
2006 Saturn Vue AWD

Re: Adhesive for towel rod

Reply #9 –
I used gorilla glue
The selected media item is not currently available.
Lynn & Marilyn Sickel
Tollville, AR
1997  U320  40'
2021 Chevrolet Silverado pickup
Motorcader  17257

Re: Adhesive for towel rod

Reply #10 –

Ed, I used an epoxy made to adhere glass to metal.  My towel rod has been on for over a year and no issues.

John M.

Amazon.com: J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries...

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
John & Carm Morales

"We travel not to go anywhere, but to just go.  We travel for travel's sake.  Our great desire is to move."

Re: Adhesive for towel rod

Reply #11 –
I used VHB tape and it has been in place for 4 yrs and with a big bath towel weight on it a lot. If you cannot get that then use the 3m tape that you can get from Napa etc for putting the vinyl side mouldings back on cars etc. The 3m VHB is the better one. Make sure the glass is cleaned properly before doing
JohnH
Coachless, now use aircraft. 2003 Ford Travelair TC280 class C. Super shape. Just for 1 yr .
1994 Ford E350 ClassC,total renovation inside and out. Now sold.
2000 U295  36' Cummins 350 c/w Banks Stinger, Resonator upgrade,Solar, LED lites.Residential fridge with slide out pantry. Build 5674. Sold
ex 92 GV 022C ored Cummins. Sold
ex 95 GV240 cat 3116. Sold
2017 Mini cooper s & 2016 land Rover LR2 HSE  LUX.
jhaygarth@aol.com    SKP #130098
treat everyone as you would like to be.

Re: Adhesive for towel rod

Reply #12 –
Thanks to all. More than one way to do it.

Quote from: John Haygarth –
I used VHB tape and it has been in place for 4 yrs and with a big bath towel weight on it a lot.
JohnH
AM Solar in Oregon uses the 3M VHB tape to install solar panels. It must be good stuff.
Ed and Michele
2000 U295  36'  (Build #5600)
8.3 ISC 350HP.
2012 Jeep Grand Cherokee (Toad)
2001 Lance Truck Camper (Sold)
2001 Lazy Daze (Class C). RK Floor Plan (Sold)

Re: Adhesive for towel rod

Reply #13 –
I used 2 parts epoxy and it's still solid after 3 kids and wife many outings.

Thanks,
Michael.
Ex 2001 U295

Re: Adhesive for towel rod

Reply #16 –
Quote from: Travelin' Man –
GE Iron Grip 100% Silicone Adhesive
Has anyone had experience with this stuff? The information on the Home Depot sight looks impressive.
 
Trent

GE Iron Grip 100% silicone adhesive sticks where other construction adhesives won't, bond to both porous and non-porous surfaces. Iron Grip adhesive provides up to 75% less clamp time than traditional construction adhesives. Iron Grip adhesive does not contain isocyanates and is low VOC, making it appropriate for interior and exterior use.

Adheres to almost any surface any time and easily bonds to porous and non-porous surfaces

Grip and adhesion typically begin to build in as little as 10 seconds and parts are repositionable for up to 5 minutes
10.1 fl. oz. cartridge that works with all standard caulking guns

Can be used indoors and out with no isocyanates and low-VOC content

Long-lasting results backed by a lifetime guarantee

No need to mist or sand glossy surfaces prior to application
Trent and Jean Eyler
2000  U295  4003  WTFE  ISC  350
Build#5603 MC#17385

Re: Adhesive for towel rod

Reply #18 –
Maybe I am just lucky, but i used hot glue and it has been holding for about 3 years .......
Carol & Jeff Savournin
Usta have a '93 U225 36', Usta have a '95 U320 40', Usta have a '02 U320 40'
Usta have a 2006 Born Free, Usta have a 2011 Phoenix Cruiser
Usta have a 2012 Jeep Wrangler Unlimited 4dr
"Your time is limited, so don't waste it living someone else's life."  Steve Jobs