Skip to main content ↑ ↓
Topic: Need Brake Parts (Read 1345 times) previous topic - next topic

Need Brake Parts

Shop Just called today says I need new rotor and Pads for right rear. Called Foretravel $$$$$$$ any other options?
Thanks Craig
Craig Wickham
1997 U295 36 Ft.

Re: Need Brake Parts

Reply #1 –
Do you have a part number?
91 GV U300 Unihome 40' Build 3811
6V92TA Detroit

Re: Need Brake Parts

Reply #3 –
Stump,
That should be the  correct # for the rear on his '97  U 295. It should also fit the ' 97 U 320.

Pads should be  KIT 15625 PM,

As always it is best to pull the # off your axle and double check.

Pamela & Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: Need Brake Parts

Reply #4 –
Thanks Trying to find some where that has parts in stock not much to choose from in central Illinois.
Craig Wickham
1997 U295 36 Ft.

Re: Need Brake Parts

Reply #5 –
Quote from: cwickham –
Thanks Trying to find some where that has parts in stock not much to choose from in central Illinois.
I doubt you will find them in stock in your area that are affordable. Is the numbers posted above correct? Maybe they can expedite ship?

91 GV U300 Unihome 40' Build 3811
6V92TA Detroit

Re: Need Brake Parts

Reply #6 –
That is also the # for my 2000 rear rotor and will fit any model from build 3336 onwards.
JohnH

here is the rotor on ebay sold by "fleetparts" Good price too.
MERITOR ROTOR 3218K167 | eBay
Coachless, now use aircraft. 2003 Ford Travelair TC280 class C. Super shape. Just for 1 yr .
1994 Ford E350 ClassC,total renovation inside and out. Now sold.
2000 U295  36' Cummins 350 c/w Banks Stinger, Resonator upgrade,Solar, LED lites.Residential fridge with slide out pantry. Build 5674. Sold
ex 92 GV 022C ored Cummins. Sold
ex 95 GV240 cat 3116. Sold
2017 Mini cooper s & 2016 land Rover LR2 HSE  LUX.
jhaygarth@aol.com    SKP #130098
treat everyone as you would like to be.

Re: Need Brake Parts

Reply #8 –
Thank You everyone for the replys, I will call FT in the am and see about expedited shipping.
Craig Wickham
1997 U295 36 Ft.

Re: Need Brake Parts

Reply #9 –
Might save yourself a few bucks if you order online and see about expedited shipping. jmo
91 GV U300 Unihome 40' Build 3811
6V92TA Detroit

Re: Need Brake Parts

Reply #10 –
Check out a place that sells truck parts or a truck dealer.

Carter-
Nac

Re: Need Brake Parts

Reply #11 –
Quote from: Carol & Scott –
We bought our helper springs from:

Meritor Parts Online | ArvinMeritor Parts | FinditParts

We have also found FindItParts to generally have best price and shipping.
Learn every day, but especially from the experiences of others. It's cheaper!  - John C. Bogle

2000 U320 36' non-slide / WildEBeest Rescue
2003 U320

Re: Need Brake Parts

Reply #12 –
Quote from: Michelle –
We have also found FindItParts to generally have best price and shipping.
They have it cheaper and free shipping if ordered online

FinditParts
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

Re: Need Brake Parts

Reply #13 –
You can buy the rotor and pads through NAPA. 

IIRC the price for the rear rotor was about $250 from NAPA but I can't recall the price of the brake shoes.
Robert
Build # 5304
1998 34' U270 Cummins 6CTA8.3

Re: Need Brake Parts

Reply #14 –
Went to Fleet Pride today and picked up 2 rotors 2 sets of pads,2 sets of slide pins 2 inner hub seals, I hope all the parts are correct wont know until Monday when shop opens. Total for everything was around $1300.00. These are for the rear.
Craig Wickham
1997 U295 36 Ft.

Re: Need Brake Parts

Reply #15 –
That sounds about right as far as cost.
91 GV U300 Unihome 40' Build 3811
6V92TA Detroit

Re: Need Brake Parts

Reply #16 –
speaking of brake part numbers.....anyone have the Meritor part numbers for our coach, Front rotors and pads.

Thx

Hans

Hans & Marjet
1995 U300 "Ben" (#4719)
3176B Cat,4060HD,Jake
SKP#139131
Motorcade#17579
2006 Honda Element (towed)

Re: Need Brake Parts

Reply #17 –
Quote from: Hans&Marjet –
speaking of brake part numbers.....anyone have the Meritor part numbers for our coach, Front rotors and pads.
Hans,

Just had our brakes done at MOT.  The part number for the pads was KIT15625PM (contains 4 pads, does two brakes).  The same part number as listed in posts above for newer models.  Shop around for cheapest price.

Don't know the front rotor number - did not need to replace ours.

New slide pins are in KIT15017 (2 pins, does one brake)

1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: Need Brake Parts

Reply #18 –
WARNING! I got brake rotors from FindItParts that were not machined correctly.

The new rotor in the picture is from FindIt, note the missing machined inset at the top of both rotors. Cost me $200 to have the machining done after we received the rotors. It was the correct Meritor number, just not correctly completed before sent to FindIt.

My two cents.....
AKA Chuck
1993 U280 40' WTB, Build 4345, CUM 8.3 "Falcor", 2010 Honda CRV TOAD (Spock), 970W solar on roof
Full-Time traveler between Quartzsite AZ, Longview WA, Ellendale ND, and Lake City SD
The selected media item is not currently available.

Re: Need Brake Parts

Reply #19 –
What is that inset machined for? What goes in it?
91 GV U300 Unihome 40' Build 3811
6V92TA Detroit

Re: Need Brake Parts

Reply #20 –
There may be a matching boss on the wheel that fit in the inset trues/aligns the wheel when installed.  Should be a good snug fit.

John
John and Stacey Smith
Motorcade NO: 11973
1997 U295 CSGI 40'..Build No. 5036     
920 Watts on the roof..CAT Power w/fuel Inj. Programmer
2021 GMC Sierra AT4 1500
EX..2015 Jeep Wrangler Sahara
Ex 1990 U280 RSAI 36'..Build No. 3638

Re: Need Brake Parts

Reply #21 –
IF your rotor is 3218T1008, it needs the lip. I believe Meritor shipped an incomplete batch to FindItParts. They had 8 left when I bought mine, and confirmed all 8 did not have the machining.
AKA Chuck
1993 U280 40' WTB, Build 4345, CUM 8.3 "Falcor", 2010 Honda CRV TOAD (Spock), 970W solar on roof
Full-Time traveler between Quartzsite AZ, Longview WA, Ellendale ND, and Lake City SD
The selected media item is not currently available.

Re: Need Brake Parts

Reply #22 –
Have to ask the question,will meritor cover the $200?
96 U270 BUILD 4810
85 380SL
Drummonds TN.

Re: Need Brake Parts

Reply #23 –
When you need to order rotors, check the wide section of the ventilated rotor for your part number, it is stamped  there.
The selected media item is not currently available.Bill&Doris 97 U270 36'
University of Parris Island Class of 66
Semper Fi  Build# 5174 MC#17094

Re: Need Brake Parts

Reply #24 –
It never hurts to ask.  I believe they should or send you a proper part.  Should be implied manufacturing warranty.
John
John and Stacey Smith
Motorcade NO: 11973
1997 U295 CSGI 40'..Build No. 5036     
920 Watts on the roof..CAT Power w/fuel Inj. Programmer
2021 GMC Sierra AT4 1500
EX..2015 Jeep Wrangler Sahara
Ex 1990 U280 RSAI 36'..Build No. 3638