Skip to main content ↑ ↓
Topic: Mouse Emitter Question (Read 463 times) previous topic - next topic

Mouse Emitter Question

I need to stick the emitter itself back on a new component, and I don't have any extra adhesive that came with the Xantech package, so I'm not sure what to use.

Can I stick it on with a thin film of clear silicone or does it require me calling Xantech for special stuff?


Re: Mouse Emitter Question

Reply #1 –
I used double sticky back foam and attached to the wire while centering the sensor.
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

Re: Mouse Emitter Question

Reply #2 –
C-Man,
Do you mean the tape is on the wire near the emitter holding the emitter in place, with no adhesive on the emitter itself?

Got it stuck on with silicone, no problem, thanks.

Re: Mouse Emitter Question

Reply #3 –
Quote from: Travelin' Man –
C-Man,
Do you mean the tape is on the wire near the emitter holding the emitter in place, with no adhesive on the emitter itself?

Got it stuck on with silicone, no problem, thanks.
Yes, Getting the clear double tape is hard to find.
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

Re: Mouse Emitter Question

Reply #4 –
OK, I've resisted long enough, what's a mouse emitter?  ???
Larry
1996 U295 36'
Build # 4805
Actually we sold it but just like to lurk

Re: Mouse Emitter Question

Reply #5 –
Quote from: lgshoup –
OK, I've resisted long enough, what's a mouse emitter?  ???
I thought it was some kind of fancy mousetrap myself....... :not:
282M
91 GV U300 Unihome 40' Build 3811
6V92TA Detroit

Re: Mouse Emitter Question

Reply #6 –
Well Larry and Stump, now that I know what it is not and I know what it looks like, what is its real purpose in life?

One end Kinda looks like something that is attached to the front panel of one or two components in in my cd, dvd, etc cabinet....forget which component(s).

Mike
2001 U320 4010 Build 5878 (Gus)
Wrangle Unlimited Toad
Nacogdoches

Re: Mouse Emitter Question

Reply #7 –
Quote from: lgshoup –
OK, I've resisted long enough, what's a mouse emitter?  ???

IR emitter cables are wired transmitters that broadcast infrared (IR) signals and commands from a remote to an external audio or video device. These cables can be used to control a stereo system's volume remotely or to share a Blu-ray player's display with screens in separate rooms, etc.