Turbo rebuilder in Los Angeles area

Skip to main content ↑ ↓

Topic: Turbo rebuilder in Los Angeles area (Read 381 times) previous topic - next topic

Turbo rebuilder in Los Angeles area

March 31, 2017, 05:17:38 pm

I have a corroded and stuck wastegate on my Holset Turbo. This is keeping me from getting the horsepower I want and seems to be keeping my Pacbrake from working properly. Does anyone have a recommended place in the Los Angeles area that does turbo rebuilds?

Thanks in advance!

Chuck

Re: Turbo rebuilder in Los Angeles area

Reply #1 – March 31, 2017, 05:24:37 pm

This one is not too far and may be of some help.
Custom Turbo Rebuilding, Inc.

John

Re: Turbo rebuilder in Los Angeles area

Reply #2 – March 31, 2017, 09:12:57 pm

Waste gate should be an off the shelf part if your mechanically inclined and you can get to it.

Re: Turbo rebuilder in Los Angeles area

Reply #3 – March 31, 2017, 10:02:54 pm

With the 8.3 Cummins, might want to check the exhaust manifold as Cummins are well known for cracking them. Lotsss of aftermarket 2 & 3 piece manifolds available that may add performance and dependability also. Many turbos you really have to be churning & burning to even get the waste gate to open. Let alone stick open.

Affiliate Notice

ForeForums is user-supported. When you purchase through some links on our site, we may earn an affiliate commission at no cost to you. As an Amazon Associate I earn from qualifying purchases.