Skip to main content
Topic: nothing at shower (Read 1761 times) previous topic - next topic

nothing at shower

Well we are four days away from our first outing with the new to us Coach. I dewinterized it this weekend and dumped some bleach in the hose into tank...all worked great, except shower has nothing to it. I did not turn on W/D combo as its not needed for awhile...but I got not even a whisper out of shower head. I removed head and I checked ball valves at water manifold...any brilliant idea here at the staff...?
2001 U320 42 tag with two slides
Build number 1583
Love this forum for all of it's help and members

Re: nothing at shower

Reply #1
Don't know if it will help now but when I get done winterizing our coach I make sure ALL faucets and valves are open and all aerator screens are off the faucets. In the spring everything then moves freely, and the calcium/crud coming out the lines does not plug the aerator screens.
I had an outside faucet on our house stick shut after I turned on the well and tried to open the faucet. It was stuck so hard I thought I would end up breaking it. Remembered JD Stevens advice about percussive persuasion. Tapped the faucet several times and it popped free!!
Nitehawk,  Demolition Lady, & our NEW master, Zippy the speeding BB cat.
1989 Grand Villa 36' ORED
Oshkosh chassis, 8.2 DD V8
2006 Saturn Vue AWD

Re: nothing at shower

Reply #2
Does your shower have a cut off so to save water when showering?  I would certainly check that.  Best of Travels.
Best of Travels

Re: nothing at shower

Reply #3
I don't know where a shut off would be except at the manifold. It has a shut off at the head and that has been checked. I even took the shower head off and made sure its off and not causing any issues...got my head scratched I can tell you that...
2001 U320 42 tag with two slides
Build number 1583
Love this forum for all of it's help and members

Re: nothing at shower

Reply #4
Also check the main block to see if it was turned off for some reason..

Re: nothing at shower

Reply #5
Well we are four days away from our first outing with the new to us Coach. I dewinterized it this weekend and dumped some bleach in the hose into tank...all worked great, except shower has nothing to it. I did not turn on W/D combo as its not needed for awhile...but I got not even a whisper out of shower head. I removed head and I checked ball valves at water manifold...any brilliant idea here at the staff...?
Double check your fill valve to make sure it's all the way closed. Easy to leave open and then you have no pressure with the onboard pump. Ours in under the bath cabinet sort of hidden away. Ball valve turns 90 degrees. I have forgotten to open it when I wondered why no water was going into to tank and forgotten to close it when I turned on the pump and it ran all the time.

Pierce
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)

Re: nothing at shower

Reply #6
Mike,

Is the coach hooked up to shore water or are you running off the fresh water tank?
Are all the other fixtures working properly?
Did the shower ever work since you've owned your FT?
Do you need to pull the shower mixing valve/faucet handle outward to turn it on?

Re: nothing at shower

Reply #7
Mike,

Is the coach hooked up to shore water or are you running off the fresh water tank?
Are all the other fixtures working properly?
Did the shower ever work since you've owned your FT?
Do you need to pull the shower mixing valve/faucet handle outward to turn it on?

Hooked to shore power. Put about 20 gals in tank by turning on fill valve with button in water bay. Turned that off and every other faucet works great. Did not work with ice maker of W/D. I blew air threw it last year during winterizing process. Yes it is a pull out mixing valve. I can't hear anything when I pull it out. I did not use shower since I bought coach but was able to blow air like I said...
2001 U320 42 tag with two slides
Build number 1583
Love this forum for all of it's help and members

Re: nothing at shower

Reply #8
Double check your fill valve to make sure it's all the way closed. Easy to leave open and then you have no pressure with the onboard pump. Ours in under the bath cabinet sort of hidden away. Ball valve turns 90 degrees. I have forgotten to open it when I wondered why no water was going into to tank and forgotten to close it when I turned on the pump and it ran all the time.

Pierce

Pierce...excuse my lack of intel on your quesion. Mine is an electric valve and I did shut that off after my filling session..
2001 U320 42 tag with two slides
Build number 1583
Love this forum for all of it's help and members

Re: nothing at shower

Reply #9
Also check the main block to see if it was turned off for some reason..

Main block I assume is the manifold and yes it is turned on correctly..as the others are. I did turn off W/D valve for now...Won't need them..
2001 U320 42 tag with two slides
Build number 1583
Love this forum for all of it's help and members

Re: nothing at shower

Reply #10
I just remembered having to change out the Moen shower valve cartridge  in our U295 when dry camping in Minnesota once.  It would get cold but no hot.  A visit to the Ace hardware took care of a new cartridge and the tool to remove the old one.
Rick & Rhonda
2003 U320 4220  Build #6199
Was
91 36' GV 300 Caterpillar, 92 40' U280 300 Cummins, 97 36' U295 300 Cummins, 2002
U320 450 Cummins
(Guess we're hooked)

The selected media item is not currently available.

Re: nothing at shower

Reply #11
I blew air threw it last year during winterizing process.


Can I ask if you used potable RV antifreeze at all or just air for your winterization?

Having a U320, that should mean you have an AquaHot, and just blowing compressed air through is not adequate for the AquaHot or you risk serious damage to the unit.
Learn every day, but especially from the experiences of others. It's cheaper!  - John C. Bogle

2000 U320 36' non-slide / WildEBeest Rescue
2003 U320

Re: nothing at shower

Reply #12
Did you try just cold water with shower head removed, and when you opened shower valve did the pump start running (even tho' no water may come out?)
If the pump does not start up with shower valve open but all others (taps open) then it sounds like there is a blockage somewere in line that is not allowing the line pressure off to give signal to pump??
JohnH
Coachless, now use aircraft. 2003 Ford Travelair TC280 class C. Super shape. Just for 1 yr .
1994 Ford E350 ClassC,total renovation inside and out. Now sold.
2000 U295  36' Cummins 350 c/w Banks Stinger, Resonator upgrade,Solar, LED lites.Residential fridge with slide out pantry. Build 5674. Sold
ex 92 GV 022C ored Cummins. Sold
ex 95 GV240 cat 3116. Sold
2017 Mini cooper s & 2016 land Rover LR2 HSE  LUX.
jhaygarth@aol.com    SKP #130098
treat everyone as you would like to be.

Re: nothing at shower

Reply #13
Can I ask if you used potable RV antifreeze at all or just air for your winterization?

Having a U320, that should mean you have an AquaHot, and just blowing compressed air through is not adequate for the AquaHot or you risk serious damage to the unit.
Yes I sucked antifreeze through system..but first I blew it all out..
2001 U320 42 tag with two slides
Build number 1583
Love this forum for all of it's help and members

Re: nothing at shower

Reply #14
Did you try just cold water with shower head removed, and when you opened shower valve did the pump start running (even tho' no water may come out?)
If the pump does not start up with shower valve open but all others (taps open) then it sounds like there is a blockage somewere in line that is not allowing the line pressure off to give signal to pump??
JohnH

No pump would start with shower valve open on cold or hot...with shower head removed.
there is nothing leaking under coach either...
2001 U320 42 tag with two slides
Build number 1583
Love this forum for all of it's help and members

Re: nothing at shower

Reply #15
If you have anti siphon valve between hose and main mixer valve , try removing it ?
Jimmy
2003 U295 3620

Re: nothing at shower

Reply #16
Sounds like the manifold valve is off or plugged up
"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4

Re: nothing at shower

Reply #17
How can one be sure that the valves marked 'washer' do not control the shower?

Re: nothing at shower

Reply #18
Exactly what I was thinking Barry.  Turn on the washing machine and take a shower Mike.

Re: nothing at shower

Reply #19
That is a good point except I didn't turn off W/D valves until later last night...and I had already tested shower to no avail...so back to zero...

Let me run this up your flagpole. Should I pull the panel in front of manifold and blow air through with shower valve open??? :o
2001 U320 42 tag with two slides
Build number 1583
Love this forum for all of it's help and members

Re: nothing at shower

Reply #20
Maybe try blowing air backwards through the line. If there is a clog maybe it would just it free. Then when water flows maybe it would pass on through.
91 GV U300 Unihome 40' Build 3811
6V92TA Detroit

Re: nothing at shower

Reply #21
Is your water pump on? Are you getting water elsewhere?
1993 U300 40ft GV SE
Build # 4344

Re: nothing at shower

Reply #22
I had our shower quit giving water,, no nutttin.... It was a $5 vacuum breaker @ the point where the flex shower hose goes into an elbow to the wall.
Spin off the shower hose and the vacuum breaker @ the elbow...
I Hit up a plumbing shop and wallah! water flowed
'02 40' U320t  4010WTFS Build 6036 1 slide
Motorcade # 17841
SKP 151920
Retired truck driver
 5 million miler
Still have itchy feet for travel

Re: nothing at shower

Reply #23
I had our shower quit giving water,, no nutttin.... It was a $5 vacuum breaker @ the point where the flex shower hose goes into an elbow to the wall.
Spin off the shower hose and the vacuum breaker @ the elbow...
I Hit up a plumbing shop and wallah! water flowed

Well SS you were right...I found it before I read your post...but that was it. I didn't know what its name was but that was the culprit. Took the hose off the L fitting and turned the water on and here come the pressure. I'm soaking it all in vinegar tonight and put together tomorrow night. I don't think I need a new one...it just had crap in it.
Again I bow to you all for the help...Only one more issue that I know of...air level light on dash and the dinger going...bus goes to travel mode fine...the bladders blow up fine on slides...it levels the coach and it will raise the coach...So God only knows what lies ahead... :o
2001 U320 42 tag with two slides
Build number 1583
Love this forum for all of it's help and members