Skip to main content ↑ ↓
Topic: Lanyard pull for draining air tanks (Read 401 times) previous topic - next topic

Lanyard pull for draining air tanks

Just a quick question... Tired of having to raise & block the coach just to drain the moisture out of the Front/Rear/HWH air tanks (My lard counter weight gets in the way)
 Should I sheath the lanyard (cable) with copper tubing when I route it to the side of the coach for easy access?
Thinking of sheathing along the front bulkhead for support, but just letting it swing from tank to bulkhead, and I haven't really figured out a good route for the lanyard to the HWH tank just yet.. Any suggestions (pic's?) more than welcome

 
'02 40' U320t  4010WTFS Build 6036 1 slide
Motorcade # 17841
SKP 151920
Retired truck driver
 5 million miler
Still have itchy feet for travel

Re: Lanyard pull for draining air tanks

Reply #1 –
I haven't done it yet, but I plan on just remote mount the valves like the wet tank and mounting them in front of the street side front tire.
Don
The selected media item is not currently available.
Don & Tys
1999 U270 3602 WTFE #5402
Xtreme Stage 1 w/Headlight, Step Conversion, etc.
2009 Honda Fit Sport with Navi
Freedom is NOT "just another word for nothing left to lose"... with apologies to Kris Kristofferson

Re: Lanyard pull for draining air tanks

Reply #2 –
Quote from: Don & Tys (AKA acousticart) –
I haven't done it yet, but I plan on just remote mount the valves like the wet tank and mounting them in front of the street side front tire.
Don
I looked at plumbing these to that location, issue being running interference with the suspension and steering, altho in front of the steer tire would lessen damage from debris thrown up by the tire. may still have to route the HWH tank and the front tank that way due to lanyards not being  long enough.
'02 40' U320t  4010WTFS Build 6036 1 slide
Motorcade # 17841
SKP 151920
Retired truck driver
 5 million miler
Still have itchy feet for travel