Skip to main content ↑ ↓
Topic: SCAN TOOL (Read 333 times) previous topic - next topic

SCAN TOOL

I would like to buy a scan tool for my 1997 U270 with Cummins 8.3 in the $100 range. I read a three-year-old thread on this, but due to the low-cost (Chinese) electronics revolution, it may be worth the risk buying a low-priced scan tool on eBay. The following tool is from a reputable seller who advertises Cummins compatibility and the following protocols:

CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000

See: NEXAS Car & Heavy Duty Truck OBD2 6 & 9 pin Diesel Gas HD Code Reader Scan...

Would this work for my rig?
1997 U270 34FT Build 5140 Cummins 8.3 Allison 3060R
Solar 1920Watts, 14KWH lithium. Orion BMS.

Re: SCAN TOOL

Reply #1 –
I do not think your coach has anything except for the transmission that has a ecm. I believe your engine is the old mechanical one.  At least mine is.
2014 ih45  (4th Foretravel owned)
 1997 36' U295 Sold in 2020, owned for 19 years
  U240 36' Sold to insurance company after melting in garage fire
    33' Foretravel on Dodge Chassis  Sold very long time ago

Re: SCAN TOOL

Reply #2 –
Your 8.3 Cummins should be a mechanical engine. No ECM so you don't need a Scan Tool. Detroit Diesel Pioneered the electronic engine controls and introduced them in 1987 on the series 60 engine.
91 GV U300 Unihome 40' Build 3811
6V92TA Detroit