Skip to main content ↑ ↓
Topic: Storage Bay Light Cover (Read 660 times) previous topic - next topic

Storage Bay Light Cover

 Looking for replacement part. 24" cover fo fluorescent lamps in storage bay.

Thanks

Re: Storage Bay Light Cover

Reply #1 –
I will be replacing all my basement lights with LED's as part of my Summer 2017 (yes, I am slow). I should have a couple of unbroken ones, depending on how many times I have to crawl in and out of the basement in the process.  :headwall:

 
Trent

Re: Storage Bay Light Cover

Reply #2 –

I am using these in the basement bays and almost every interior overhead cabinet, closet, bathroom and kitchen cabinet.

LEDwholesalers Aluminum Channel System with Cover, End Caps, and Mounting...

Aluminum channels with plastic covers, perfect for LED strip lights.  The come with mounting clips and end caps.  In the basement locations, solder the connections and cover with heat shrink tube or some silicone for durability.  Actually, any location.

This double stick tape is perfect for LED strip lights.

JVCC DC-WGT-01 Double Coated Window Glazing Tape: 1/16 in. thick x 3/8 in. x...

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.

Re: Storage Bay Light Cover

Reply #3 –
Roger, my intention is LED everywhere too. So in basement you'll use no cover over housing?

If so that will void my need!

Re: Storage Bay Light Cover

Reply #4 –
The only place my LEDs are not in a track and covered is in the engine bay where I used a strip of waterproof LEDs.  They proved to be not very reliable in other places where they get used a lot.  So in the engine bay where they don't get much use, i used them up held in place with small clips.

There is too much moving around in the basement bays to not cover them.

Re: Storage Bay Light Cover

Reply #5 –
How did you cover them in the storage bays?  Pic?

Re: Storage Bay Light Cover

Reply #6 –
Randy,
 
See the first link Roger gave you.
 
Trent

Re: Storage Bay Light Cover

Reply #7 –
I replaced my bay lights with these 8 years ago. They are so thin they are up out of the way and somewhat protected. No longer banging into and breaking the lights. See no need for a cover. Cool White High Power LED Light Fixture with Switch | Aluminum Light Bar...  I bought the ones with a switch because I don't trust the bay door switches.

Re: Storage Bay Light Cover

Reply #8 –
Randy,
If you insist on those lights you can have mine . They are going to be gone when I get to Florida.
John M.

Re: Storage Bay Light Cover

Reply #9 –

Randy,
Here are some aluminum extrusion with lenses you can use in the basement and other areas.  I'm sure you can find others online.
John M

Amazon.com: Led extrusions: Industrial & Scientific

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.

Re: Storage Bay Light Cover

Reply #10 –
Ok, LED's for basement are on the list after interior!

Thanks

Re: Storage Bay Light Cover

Reply #11 –
What led's are you using in the aluminum channel?

Re: Storage Bay Light Cover

Reply #12 –

I have been using these in the basement, 218 lumens per ft, 6000°K
Amazon.com: LE 16.4ft 300 SMD 5050 LEDs Flexible Strip Lights, Daylight...

Inside, smaller LED elements, 91 lumens per ft, 3000°K
Amazon.com: LE 16.4ft 12V Flexible LED Strip Lights, 3000K Warm White, 300...

Inside, bigger LED elements, 218 lumens per ft, 3000°K
Amazon.com: LE 16.4ft 300 Units SMD 5050 LEDs Flexible Light Strip, 3000K...

The LE brand has been very reliable for me.  Better than any other brand.



As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.

Re: Storage Bay Light Cover

Reply #13 –
Where are you mounting the little transformer boxes these need to operate?

Re: Storage Bay Light Cover

Reply #14 –
All of these are higher quality strips with enough voltage tolerance to just use the coach 12v wiring directly.

The micro LEDs wired directly into fine copper wire that I use on the awning have no voltage compensation so for those I use a plug in power supply with dimmer.  Plugs in in the water manifold bay, wires run up the awning arm.