Skip to main content
Topic: Best Thread Sealant for Diesel (Read 556 times) previous topic - next topic

Best Thread Sealant for Diesel

The time has come to replace the Winn fuel filter with the Racor system and I need to learn the best thread sealant for use with diesel. Thanks!
David and Carolyn Osborn
1995 U320C SE 40' Build 4726 Feb 1995
FMCA 147762
Motorcade 17186

Re: Best Thread Sealant for Diesel

Reply #1

The label on the product should tell you if it's resistant to diesel fuel.
I wouldn't use Teflon tape for your application.

Amazon.com: Gasoila Soft-Set Pipe Thread Sealant with PTFE Paste, Non Toxic,...

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.

Re: Best Thread Sealant for Diesel

Reply #2
Same, Gasoila. I use it all the time at work and it never leaks.
95 U300SE

Re: Best Thread Sealant for Diesel

Reply #3
Check shelf life!!
JC
1999 U320

Re: Best Thread Sealant for Diesel

Reply #4
Gasoila, good stuff.

Roland
1993 U280 4341
2010 Jeep Liberty
The Pied Pipers

Re: Best Thread Sealant for Diesel

Reply #5
Thanks for the prompt responses. I found Gasoila at my local Tractor Supply Conpany and will use it.
David and Carolyn Osborn
1995 U320C SE 40' Build 4726 Feb 1995
FMCA 147762
Motorcade 17186

Re: Best Thread Sealant for Diesel

Reply #6
Seems like all the fittings on the racor that replaced the Winn were either o ring boss or flares, no sealant necessary on these.
"Not so  long ago we were a nation of risk takers, riding five million pounds of  thrust straight into space."  Joe Gresh
Chuck Pearson
1996 U295
2018 Can Am X3 TurboRS

Re: Best Thread Sealant for Diesel

Reply #7
I recently did the same pre- fuel filter switch and used GASOILA.
1995 U320C SE 40'
Jeep 4x4 Commander - Limited - Hemi
"The Pack"  Yogi and Diesel our Airedales -  Charlie our Boxer/Akita mix. Gone but NEVER forgotten Jake our yellow Lab.
NRA Law Enforcement Firearms instructor - Handgun/shotgun
Regional Firearms instructor for national Armored Transp. Co.

Re: Best Thread Sealant for Diesel

Reply #8
Follow up question: I assume the fittings on the Winn system and the Racor system are the same, and I now see that the Racor system uses straight threads and O-rings. Can I assume that the fittings on the Winn system are the same? It appears as if the fittings on the Winn have an adapter between the filter and fuel lines, and that the fittings on the fuel lines are tapered pipe fittings and would require the thread sealant.
David and Carolyn Osborn
1995 U320C SE 40' Build 4726 Feb 1995
FMCA 147762
Motorcade 17186