Skip to main content ↑ ↓
Topic: Genwizard Fault Light (Read 1079 times) previous topic - next topic

Genwizard Fault Light

I set my Powertech 8KW generator on auto start. When it started, I manually turned it off, not being aware that it needs to run at least 30 minutes. The fault light is on and I understand to turn it off the I need to toggle the switch on the Genwizard module to the stop position. My problem is I don't know where this module is located and what it looks like.
Can anyone please direct me to its location? Thanks!
1997 U270 36'
Build #5115
2014 Jeep Rubicon towed
1972 Boston Whaler 16'
Charlie

Re: Genwizard Fault Light

Reply #1 –
Just a guess ( don't know genwizard) but try turning the toggle switch off at the front of generator control panel that should re set everything.
Bruce, Linda, and Macy
Zoey RIP 1/20/19
1999 U295 40' build #5400
2017 silver Jeep Wrangler, 1260 watts of solar on top
Moving around the country

Re: Genwizard Fault Light

Reply #2 –
I exercised all of the switches on the front of the unit, no luck!
1997 U270 36'
Build #5115
2014 Jeep Rubicon towed
1972 Boston Whaler 16'
Charlie

Re: Genwizard Fault Light

Reply #3 –
Can you post a photo of the generator control box, this will help to determine if you have a gen wizard or an es52 start system.
The selected media item is not currently available.Bill&Doris 97 U270 36'
University of Parris Island Class of 66
Semper Fi  Build# 5174 MC#17094

Re: Genwizard Fault Light

Reply #4 –
Gen wizards were problematic and normally removed
"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4

Re: Genwizard Fault Light

Reply #5 –
My Black Foretravel manual lists it as a Genwizard.
1997 U270 36'
Build #5115
2014 Jeep Rubicon towed
1972 Boston Whaler 16'
Charlie

Re: Genwizard Fault Light

Reply #6 –
Quote from: Want2rv –
I set my Powertech 8KW generator on auto start. When it started, I manually turned it off, not being aware that it needs to run at least 30 minutes. The fault light is on and I understand to turn it off the I need to toggle the switch on the Genwizard module to the stop position. My problem is I don't know where this module is located and what it looks like.
Can anyone please direct me to its location? Thanks!
Your coach may be different, but on my 99 was located under dash mounted on aft wall of dash [facing back down the center of coach] it was silver and black and about 4x4x2 and several sets of wires coming from it. Lift center dash and look straight down.
Jim C.
coachfree, previous 1997, 1999, 2000, and 2003 Foretravels.

Re: Genwizard Fault Light

Reply #7 –
Open the top of the dash and, trace the wires from the start stop switch on the dash, it should lead you to the module, if the module is bad, you will to replace it with another unit.I don't think that the Gen Wizard is made any longer.
The selected media item is not currently available.Bill&Doris 97 U270 36'
University of Parris Island Class of 66
Semper Fi  Build# 5174 MC#17094

Re: Genwizard Fault Light

Reply #8 –
No luck finding the control box under the dash, there was a wiper control box and the remote CB radio module there.
I can't trace the wires from the switch since it is located above the windshield in front of the driver.
I have owned this magnificent machine for less than a month now!
Thanks for the help.
1997 U270 36'
Build #5115
2014 Jeep Rubicon towed
1972 Boston Whaler 16'
Charlie

Re: Genwizard Fault Light

Reply #9 –
I thought the genwizard was in the front drivers side compartment?  Mine is gone,  I can see were it was
"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4

Re: Genwizard Fault Light

Reply #10 –
Auto Wizard fuse location
Jim C.
coachfree, previous 1997, 1999, 2000, and 2003 Foretravels.

Re: Genwizard Fault Light

Reply #11 –
Quote from: Want2rv –
I can't trace the wires from the switch since it is located above the windshield in front of the driver.
The switch might have been moved, here is a picture of my 97 U-270

Steve

1997 U270 36' build 5179
Motorcade #18147
1980 CJ5

Re: Genwizard Fault Light

Reply #12 –
Caflashbob, you were correct. Thank you!
The box is located in the front, driver's side compartment.
1997 U270 36'
Build #5115
2014 Jeep Rubicon towed
1972 Boston Whaler 16'
Charlie

Re: Genwizard Fault Light

Reply #13 –
Our build #5132 has no auto position on the gen start and no evidence of a large box for the gen wizard.  Apparently left out of our coach new

The magnum system I am slowly assembling has a auto gen start module ME-AGS-N that works though the remote panel ME-ARC and the inverter.

Or so it's says. 
"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4