Re: Grand Villa Windshield Woes... Reply #50 – June 11, 2019, 11:23:03 am A couple of other small re-engineers.. I removed all of my trim/body strips and injected structural glue into the seams along with adding 3/16 big head rivits between the screw holes . This includes both caps and the entire side panels. Big improvement, less leaks , etc. I cut out the floor under the water tank and set the tank on tubes/plywood that sit directly on the frame rails . This removes the 500# of water trying to slosh around the nose cap. I took some precautions to allow the tank to move a little inside the box , but inspections have shown almost no movement . Quote Selected 2 Likes
Topic: Grand Villa Windshield Woes...