Skip to main content ↑ ↓
Topic: Roadmaster Brite Lite install (Read 891 times) previous topic - next topic

Roadmaster Brite Lite install

Since putting in the roadmaster baseplate and a roadmaster tail light wiring kit with separate bulbs, I need a 3-2 converter to power all the bulbs for turn, brake and lights. I did a search on the forums, and did not come up with any hard data. What I am looking for is how to best tap into the coaches brake, left and right turn signals. I guess I could tap into the existing receiver hitch, but wonder if there is a better way. And ideas?
Thanks,
Bob
'99 U320 40 WTFE
Build #5462,
1500 Watts Solar 600 amp Victron lithium
2012 Jeep Grand Cherokee Overland Hemi
Instagram bobfnbw
Retired

Re: Roadmaster Brite Lite install

Reply #1 –
I used something like this spliced into my coach wiring prior to the hitch plug. Hopkins Tail Light Converter Kit with 4-Pole Flat Trailer Connector Hopkins... I had a powered one but it got water in it and shorted out so I went back to a basic one.

Mark
The selected media item is not currently available.
Mark and Tanya
Milton , Florida
US Navy Veteran (DV)
1999 U270 Special 40' CAI , 2015 Jeep Wrangler Sahara

Re: Roadmaster Brite Lite install

Reply #2 –
I used the wires going into the convertor that came from the factory, to wire my Jeep up.
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

Re: Roadmaster Brite Lite install

Reply #3 –

I am using, and had perfect results with: Amazon.com: Roadmaster 732 Brite-Lite 3-to-2 Wiring Converter: Automotive

And I've been told by a great tech, not to use one made by Curt.  He has found approx 30% of them defective.  Even said one mfg is having them replaced on new rvs, on a campaign by dealers, due to so many failures.  Sounded crazy as I like many items built by Curt.  Amazon.com: Curt Manufacturing CURT 58240 Non-Powered 3-to-2-Wire Taillight...

I too wired it right above hitch sitting on cross rail, replacing what I thought was the factory unit.

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
97 U295 40, Build #5040, 6C8.3 325 HP
Oregon Continuous Traveler
Samsung Residential #RF20HFENBSR,
Xantrex SW2012, (3)AGM8D Hse, (2)AGM Grp24 Eng, Victron BMV-712, 1800w Solar 4 LG & 2 Sunpower
Extreme Full Body Pt w/hdlmps, new furn/floor, 4 down Lexus 2004 GX470 AWD curb weight 4,740 lbs
Prev: 1990 Barth, 10L 300 2 yrs; 91&92 Monaco Signature, 10 yrs, 10L C 300 &  6C8.3 300; 1997 ForeT 6C8.3 325 since May 2017.  Employed by Guaranty RV 14+ yrs.  Former VW New Car Dlr/Service Dlr, Sales Mgr, Rv Sales, and Service Adviser from 1968-2017
"Don't criticize what you can't understand" Bob Dylan

Re: Roadmaster Brite Lite install

Reply #4 –
It is good to note that these devices are only necessary when the towed has combined brake and turn signals. Our Honda Fit towed has separate (amber) turn signals and I removed the factory combiner and rewired the socket. I prefer the separate amber turn signals over the combined units (just like our coach), because I think it gives more of a sense of urgency to the driver in my blind spot >:D .
Don
The selected media item is not currently available.
Don & Tys
1999 U270 3602 WTFE #5402
Xtreme Stage 1 w/Headlight, Step Conversion, etc.
2009 Honda Fit Sport with Navi
Freedom is NOT "just another word for nothing left to lose"... with apologies to Kris Kristofferson

Re: Roadmaster Brite Lite install

Reply #5 –

Thanks for all the reply's. I wired it today after purchasing a Hopkins 47180 Endurance Multi-Tow 4 Flat to 7 RV Blade and 4 Flat Wiring Kit from amazon with next day free shipping.. I had to put that in for a just in case I have to tow a real trailer. The 4 flat setup I have for my jeep wouldn't work then. So with this, I have the best of 3 worlds in towing. 4 flat, 7 wires and the one the po left me. I tapped into the wires going to the old hitch. Havne't been able to hook the jeep up to test it yet but should be ok. Still have to hook up a 12volt power to it, but for now it will work for my needs. Hot as heck here in south Texas and during the cooler times I am out side working on it, but when it gets hot i am into my new project, sewing new awnings... but that is for a new thread soon to come.
Bob

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
'99 U320 40 WTFE
Build #5462,
1500 Watts Solar 600 amp Victron lithium
2012 Jeep Grand Cherokee Overland Hemi
Instagram bobfnbw
Retired