Skip to main content ↑ ↓
Topic: Javalin 2u9 used sensor  (Read 565 times) previous topic - next topic

Javalin 2u9 used sensor

Hello : Would like to see if anyone still has old sensor from 2u9 need to cut open to see what's inside. Started to rebuild my system but only have 2 need more tell me what you have. PS some were brass or later ones were plastic with black cap. Thank you    John
John Patrick
2002 U270

Re: Javalin 2u9 used sensor

Reply #1 –
I pulled the two from my waste tanks and put a plug in the holes.  They were full of something black and gooey.  There is still one in the fresh side if that works. I would have to get it out.
Roger Engdahl and Susan Green
2001 U320 3610 #5879 (Home2) - 2014 Jeep Cherokee or 2018 F150
Hastings, MN

Re: Javalin 2u9 used sensor

Reply #2 –
 Thank you no hurry one of them has a little circuit board on top of the sensor ,the other one doesn't just looking for one that I can visually see what the circuit board looks like  thanks again John
John Patrick
2002 U270

Re: Javalin 2u9 used sensor

Reply #3 –
Will be looking to see what you learn...
Dick
Dick, '03 U320 40' Tag, 2 slides, Coach #6075
Full Timers
2009 Honda CR-V

Re: Javalin 2u9 used sensor

Reply #4 –
 So far I was able to buy the little pressure sensor for $17 I opened up one of my old sensors that I had and removed old sensor. solder the wires to new sensor, 3/4"new pvc plug drilled hole into top inserted new sensor then  encapsulated with hot glue gun.  One of my old sensors only had the sensor with the three wires soldered to it , my other sensor had a circuitboard with the sensor solder to it and then the existing three wires .  Unfortunately in my excitement I hot glue gun the assembly altogether without taking a picture of the circuit board so I'm not exactly sure what that circuitboard actually does or if I can reproduce one myself . Both are working now after the recalibration  process . Still looking for more used sensor thank you John
John Patrick
2002 U270