Skip to main content ↑ ↓
Topic: Modifications to ac filter (Read 467 times) previous topic - next topic

Modifications to ac filter

Looking for a better design. To change my ac filters I have to remove decorative buttons then screws and finally the ceiling panels, I can't imagine not coming up with an easier way. My first thought was to somehow hinge the panels to access the filters. The next thought may end of being very thin rare earth magnets to hold it all in place, just pull the panels off and swap out the media filters. Any ideas would be appreciated.
Ahall
2018 ih 45

Re: Modifications to ac filter

Reply #1 –
Magnets may be a good solution, post a picture of what your unit looks like. I am an HVAC applications/solutions engineer.
Old Phart Phred, EIEIO
89 GV ored 36' #3405 300 hp cat 3208 ATAAC side radiator, mountain tamer exhaust brake

Re: Modifications to ac filter

Reply #2 –

ahall,  You are definitely  going to need to post pictures.  Many of us have never even seen the insides of an 2018 IH45.

I'm jealous. 8)  8)
1998 U320 40'
2005 GMC Yukon
MC# 17609

Re: Modifications to ac filter

Reply #3 –
Ahaul, Newmar has a similar system to what you are suggesting with a piano hinge and magnets.  They work exceptionally well.  They have a return plenum going the full length of the RV with multiple filters and that allows very easy access to clean the removable, washable filters.  It would sure be worth looking at.
97 U295 40, Build #5040, 6C8.3 325 HP
Oregon Continuous Traveler
Samsung Residential #RF20HFENBSR,
Xantrex SW2012, (3)AGM8D Hse, (2)AGM Grp24 Eng, Victron BMV-712, 1800w Solar 4 LG & 2 Sunpower
Extreme Full Body Pt w/hdlmps, new furn/floor, 4 down Lexus 2004 GX470 AWD curb weight 4,740 lbs
Prev: 1990 Barth, 10L 300 2 yrs; 91&92 Monaco Signature, 10 yrs, 10L C 300 &  6C8.3 300; 1997 ForeT 6C8.3 325 since May 2017.  Employed by Guaranty RV 14+ yrs.  Former VW New Car Dlr/Service Dlr, Sales Mgr, Rv Sales, and Service Adviser from 1968-2017
"Don't criticize what you can't understand" Bob Dylan