Skip to main content
Topic: Aqua hot to engine hoses (Read 431 times) previous topic - next topic

Aqua hot to engine hoses

Well, I'm getting closer to putting in new radiator and CAC all new hoses etc. I thought I had everything marked but apparently when I took the Aqua hot hoses off the engine I didn't mark them. Question-- does it matter which side of aqua hot pump is hooked to which fitting on engine.  I can get suction and discharge from pump I just wanted to make sure which  (suction or discharge)
goes to which fitting on engine!
Thanks in advance for help
Chris
1999 U 320 DGFE
Build Number 5523
Chris & Elka Lang
In the field, Lonoke AR

Re: Aqua hot to engine hoses

Reply #1
next question is where is best place to get a thermostat for the M11
Chris
1999 U 320 DGFE
Build Number 5523
Chris & Elka Lang
In the field, Lonoke AR

Re: Aqua hot to engine hoses

Reply #2
Chris,

At the AH heater, the coolant from the engine goes to the engine preheat pump.  The now warmed engine coolant comes out the other side of the heater and returns to the engine.  Hope this helps you.
Rudy Legett
2003 U320 4010 ISM 450 hp
2001 U320 4220 ISM 450 hp
1995 U320 M11 400 hp
1990 Granvilla 300 hp 3208T
Aqua Hot Service Houston and Southeast Texas